owners manual Chrysler Crossfire

owners manual Chrysler Crossfire - year of production: 2003, 2004, 2005, 2006, 2007 - Chrysler Crossfire owners manual EN

Document: pdf (1.68 MB) 296 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chrysler Crossfire, year of production 2003 - 2007:

UNDERSTANDINGTHEFEATURESOFYOURVEHICLE 99 NOTE: Step3doesnothavetobefollowedtoprogramNOTE: Some gate operators and garage door openers additional hand-held transmitters.mayrequireyoutoreplacethisProgrammingStep5with 4. Choose one of the three buttons to program. Place theprocedures noted in the “Gate Operator/Canadian Pro- hand-held controller 1–3 inches (25–76 mm) from thegramming” section. universal transceiver while keeping its indicator light in6. The indicator light in the universal transceiver will 3 view. begin to flash, first slowly and then rapidly. Release both buttons after the indicator light changes from slow to rapid flash. If, after 90 seconds, the indicator does not flash rapidly or goes out, return to Step 1 and repeat the procedure. 7. Press and hold the just programmed universal trans- ceiver button and observe the indicator light. If the indicator stays on constantly, programming is complete and your device should activate when the universal transceiver button is pressed and released. NOTE: Toprogramthe remaining two universal trans- ceiver buttons, begin with Programming Step 4. Do not 5. Using both hands, press the hand-held transmitterrepeat Steps 1, 2, and 3. button and the desired universal transceiver button. Do not release the buttons until Step 6 has been completed.

Download PDF

Click here to download a pdf file with an instruction manual for Chrysler Crossfire
year of production from: 2003

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.