owners manual Jeep Wrangler

owners manual Jeep Wrangler - year of production: 1997 - Jeep Wrangler TJ 2013 owners manual EN

Document: pdf (5.42 MB) 666 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Wrangler, year of production 1997:

96 THINGS TO KNOW BEFORE STARTINGYOUR VEHICLE 5. If the child restraint has a top tether strap and theIf the buckle or the cinching latch plate is too close to the seating position has a top tether anchorage, connectbelt path opening of the child restraint, you may have the tether strap to the anchorage and tighten the tethertrouble tightening the seat belt. If this happens, discon- strap. Refer to “Lower Anchors and Tethers for Chil-nect the latch plate from the buckle and twist the short dren (LATCH) Restraint System” for directions tobuckle-end belt up to three full turns to shorten it. Insert attach a tether anchor. the latch plate into the buckle with the release button 6. Test that the child restraint is installed tightly byfacing out, away from the child restraint. Repeat steps 4 pulling back and forth on the child seat at the beltto 6, above, to complete the installation of the child path. It should not move more than 1 inch (25.4 mm)restraint. in any direction. If the belt still cannot be tightened after you shorten the Anyseat belt system will loosen with time, so check thebuckle, disconnect the latch plate from the buckle, turn belt occasionally, and pull it tight if necessary.the buckle aroundonehalfturn,andinsertthelatchplate into the buckle again. If you still cannot make the child restraint installation tight, try a different seating position.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Wrangler
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.