owners manual BMW 1 E87

all ratings: 0 average rating: 5

Things to remember when driving Break-in period Following part replacement Moving parts need breaking-in time to adjust to The same break-in procedures should be each other. Please follo w the instructions below observed if any of the components mentioned in order to achieve the optimal service life and above have to be renewed in the course of the economy of operation for your vehicle.vehicle's operating life. Engine and differential Saving fuel Always obey all official speed limits. The fuel consumption of your vehicle depends Up to 1,200miles/2,000km on several factors. You can lower fuel consump- Drive at varying engine and road speeds, but do tion and the environmental impact by taking not exceed an engine speed of 4500 rpm or a certain measures, adjusting your driving style road speed of 100mph/160km/h. and having the vehicle serviced regularly. Avoid full-throttle operation and use of the Remove any unneeded cargo transmission's kick-down mode. Additional weight increases fuel consumption. After driving 1,200miles/2,000 kmRemove any mounted parts after you Engine and vehicle speeds can be gradually have finished using them increased. Remove unneeded additional mirrors, the roof Tires rack and the rear luggage rack after use. Mounted parts affect the vehicle's aerodynam- Things to remember when drivingDue to technical factors associated with their manufacture, tires do not achieve their full trac-ics and increase fuel consumption. tion potential until after an initial break-in Close the windows and glass roof period. Therefore, drive cautiously during the An open glass roof or window causes higher air first 200 miles/300 km. resistance and thus increases fuel consump- Brake system tion. Brakes require an initial break-in period of Check tire inflation pressure regularly approx. 300miles/500km to achieve optimized Check the tire inflation pr essure at least twice a contact and wear patterns between brake pads month and before embarking on a long journey, and rotors. Drive cautiously during this break-in and correct it if necessary. period. Low tire inflation pressure causes higher rolling Clutch resistance and thus increases fuel consumption The function of the clutch reaches its optimal and tire wear. level only after a distance driven of approx. Set off immediately 300miles/500km. During this break-in period, engage the clutch gently. Do not let the engine warm up while the car is still standing, but set off immediately at moder- ate engine speed. This is the fastest way for the cold engine to reach its operating temperature. 96 Online Edition for Part no. 01 41 2 600 853 - © 08/08 BMW AG

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders