Tesla S owners manual page 96

text version of content this owner's manual page from owners manual to the vehicle Tesla S, year of production 2012:

® HomeLink Universal Transceiver When headlights flash, Model S has About HomeLink learned the remote and you can touch If Model S is equipped with the optional techContinue on the touchscreen . If the ® package, you can program the HomeLink headlights do not flash, refer to the Universal Transceiver to operate up to threeguidelines below. garage doors, gates, lights, and security• Next, the device's receiver learns Model S. systems that can transmit Radio Frequency The touchscreen instructs you to press (RF) signals. the LEARN button on the garage door or gate's receiver. If training the receiver Programming HomeLink does not work, refer to the guidelines below. 1. Park Model S in front of the device you NOTE: Only devices that are equipped want to program, and have the devices with a “rolling code” remote need to learn remote control ready. Model S. If you have a very old device that 2. Touch Controls > Settings > HomeLink on is not equipped with a rolling code the touchscreen. remote, the device does not need to learn 3. Touch Add New HomeLink, then use the Model S and you can skip this part. You onscreen keyboard to enter a name for can also skip this step if your receiver is your HomeLink device. Quick-Train compatible. The opener 4. Touch Program. should work. 5. Follow the onscreen instructions. Once programmed, you can operate the Headlights do not flash device by touching its corresponding • Check the batteries in the remote. It is a HomeLink icon on the touchscreens status good idea to replace the batteries before bar. HomeLink remembers the location of you start programming. your programmed devices. When you • Hold the remote against the nose cone, approach a known location, the HomeLink with the button pressed, about 6 inches to control on the touchscreen automatically the left of the Tesla emblem. In some drops down. When you drive away, it cases you must hold the remote for up to disappears. three minutes. Note: For security reasons, erase your • Check compatibility of the remote by HomeLink settings if you sell Model S. contacting the HomeLink manufacturer Warning: Your device might open or (www.homelink.com). close during programming. Before After programming, the device does not work programming, make sure that the device is clear of any people or objects. • Park Model S with its front bumper as Warning: Do not use the HomeLink close as possible to the HomeLink device Universal Transceiver with a garage door(garage door, gate, etc). that does not meet safety standards. A• Make sure you havent reached the device garage door opener that cannot detect receiver's limit of learned remotes/cars. an object in its path and then Most receivers can learn up to five automatically stop and reverse, does notremotes/cars. If the receiver's memory is meet these standards. Using a garage full, you must clear the memory and door opener without these features restart the programming process. For increases the risk of injury or death. instructions on how to clear the receiver's memory, refer to the owner Troubleshooting HomeLink documentation provided with the HomeLink device. When programming a HomeLink device, the• Make sure you are pressing the receiver's touchscreen steps you through a two-part LEARN button. Most receivers have two programming process: buttons and a LED. One button is a RESET • First, Model S records the signal from thebutton and the other is a LEARN button. remote. The touchscreen instructs you toPressing the LEARN button usually causes stand in front of the car, point the remotethe LED to flash. For instructions on how at the front bumper and press and hold to put the receiver into learning mode, the button until the headlights flash. refer to the owner documentation provided with the HomeLink device. 96 Model S Owner's Manual

owners manual Tesla S

owners manual Tesla S - year of production: 2012 - Tesla S owners manual EN