or
owners manual BMW Z4 E89
owners manual BMW Z4 E89 - year of production: 2008 - BMW Z4 E89 owners manual EN
Document:
pdf (3.38 MB) 132 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle BMW Z4 E89, year of production 2008:
Adding engine oil You can also call BMW of North America at
od 1-800-831-1117 or visit the website
www.bmwusa.com to obtain this information.
ho Do not use any oil additives, as they could
e cause engine damage under some cir-
h cumstances.<
Viscosity classes
Viscosity is a measure of an oil's flow rating and
is categorized in SAE classes.
Do not add the maximum amount of 1 USquart/Selecting the appropriate SAE class depends
Under t1liter of engine oil until the warning lamp lights on the regional climatic conditions in which you
up in the instrument cluster, refer to page 92, or normally drive your BMW.
until the oil level monitor shows "+1.0".Approved oils belong to the 5W-40 and
Add oil within the next 125 miles/200 km, 5W-30 classes.<
otherwise the engine could be dam-These oils can be used for driving at all outside
aged.< temperatures.
Keep oils, greases, etc. out of the reach of
children and comply with the warnings on
the containers. Otherwise, health hazards may Coolant
result.<
Warning lamp
Oil change The warning lamp lights up:
Have your oil changed only by a BMW center or The coolant level is too low. Top up the
a workshop that works according to BMW coolant as soon as possible.
requirements with the appropriately trained Do not open the cooling system when the
personnel. engine is hot. If you do, escaping coolant
Approved engine oils can cause burns.<
The quality of the engine oil is extremely impor-Coolant consists of water and coolant additives.
tant for the function and life of an engine. BMW Not all commercially available additives are suit-
continuously approves specific oils after con-able for your BMW. Your BMW center knows
firming their suitability for use in its vehicles which additives are appropriate.
with extensive testing. Only use approved additives, otherwise
Only use approved BMW High Performance the engine could be damaged. The addi-
Synthetic Oil. tives are hazardous to health.<
If BMW High Performance Synthetic Oil is not Comply with the appropriate environ-
available, you can add small quantities of other mental protection regulations when dis-
synthetic oils in between oil changes. Only use posing of coolant additives.<
oils with the API SH specification or higher.Checking the coolant level
Your BMW center will be glad to answer 1. The engine must be at ambient tempera-
any questions regarding BMW High Per-ture.
formance Synthetic Oil or other approved syn-2. Turn the cap of the expansion tank a little
thetic oils.< counterclockwise to allow any accumulated
94
Download PDF
Click here to download a pdf file with an instruction manual for BMW Z4 E89
year of production from: 2008
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
BMW Z4 E89 owners manual
pages 93 - 99
BMW Z4 E89 owners manual
page 96 / 132
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF