Mini Paceman owners manual page 95

text version of content this owner's manual page from owners manual to the vehicle Mini Paceman, year of production 2013:

CONTROLS Practical interior accessories 5.As soon as the LED flashes rapidly, release Synchronizing: both buttons. The quick flashing indicates 1.Park your vehicle within the range of the that the button on the rearview mirror has remote-controlled device. been programmed. Do not exceed the 164 ft/50 m range of the If the LED does not flash rapidly after remote-controlled device. approx. 60 seconds, alter the distance 2.Program the particular button on the rear- between the rearview mirror and hand-held view mirrors as described. transmitter and repeat this step. Several attempts at different distances may be nec-3.Find and press the button for synchronizing essary. Wait at least 15 seconds before each the device to be set. There remain approx. attempt. 30 seconds for the next step. Canada: if the programming was interrupted 4.Press and hold the programmed button on by the hand-held transm itter, press and hold the rearview mirror for approx. 3 seconds the memory button and press the button on and then release. Repeat this step, possibly the hand-held transmitter for 2 seconds and up to three times, to complete the synchro- release several times. nization. After the synchronization is com- 6.To program other functions on other but-pleted, the programmed function is imple- tons, repeat steps 3 to 5. mented. You can operate the system with the engine To reprogram individual buttons running or with the ignition switched on.1.Switch on ignition. Special features of hopping-code 2.Press and hold the button to be pro- transmitter systems grammed on the rearview mirror. If the device cannot be operated after being 3.As soon as the LED on the rearview mirror programmed repeatedly, then check if the starts flashing slowly, hold the hand-held device to be operated is equipped with a hop-transmitter of the device to be operated ping-code system. In addition, check in the approx. 1in/2.5cm to 3in/8cm from the operating instructions for the device or press the buttons on the rearview mirror. The required programmed button on the rearview mirror for a distance depends on the hand-held trans- longer period of time. If the LED on the rearview mitter. mirror first flashes quickly and then is on for 4.Press and also hold the button with the 2seconds, then the device is equipped with a desired function on the hand-held transmit- hopping-code system. The flashing and the LED ter. being on repeats itself for approx. 20 seconds.5.As soon as the LED on the rearview mirror In addition, for devices with hopping-code sys-starts blinking faster, release both buttons. tems, the integrated universal remote control The quick flashing indicates that the button and the device must be synchronized. on the rearview mirror has been pro- Information about synchronizing can be found grammed. The device can now be operated in the operating in structions for the device to be using the button on the rearview mirror. set. Canada: if the LED is not flashing rapidly Programming will be easier with the aid of a sec-after 60 seconds, change the distance and ond person. repeat the step or, if the programming was interrupted by the hand-held transmitter, press and hold the memory button and 94 Online Edition for Part no. 01402917368 - © 10/12 BMW AG

owners manual Mini Paceman

owners manual Mini Paceman - year of production: 2013 - Mini Paceman owners manual EN