Nissan Juke owners manual page 95

text version of content this owner's manual page from owners manual to the vehicle Nissan Juke, year of production 2010:

Black plate (93,1) 3.Close all doors. Lock all doors. The doorsVehicle security system activationNISSAN VEHICLE IMMOBILIZER SYS- can be locked with: The vehicle security system will give the follow-TEM . the LOCK button on the keyfob oring alarm: TheNISSANVehicleImmobilizer System will not Intelligent Key (if so equipped).The headlights blink and the horn soundsallow the engine to start without the use of the . any request switch (Intelligent Keyintermittently. registered key. equipped model) . The alarm automatically turns off afterIf the engine fails to start using the registered . the power door lock switch approximately 50 seconds. However, thekey, it may be due to interference caused by alarm reactivates if the vehicle is tamperedanother registered key, an automated toll road . the key — master or mechanical (In-with again. device or automated payment device on the key telligent Key equipped model) ring. Restart the engine using the following The alarm is activated by: procedures: 4.Confirm that the security indicator light illuminates. The security indicator light stays.Unlocking the door without using the keyfob,1.Leave the ignition switch in the ON position on for about 30 seconds. The vehiclethe Intelligent Key (if so equipped) thefor approximately 5 seconds. security system is now pre-armed. Afterrequest switch (if so equipped) or the key.2.Place the ignition switch in the OFF or about 30 seconds the vehicle security(Even if the door is opened by releasing theLOCK position and wait approximately 10 system automatically shifts into the armeddoor inside lock knob, the alarm willseconds. phase. The security light begins to flashactivate.) once every approximately 3 seconds. If,How to stop an activated alarm3.Repeat step 1 and 2 again. during this 30-second pre-arm time period, 4.Restart the engine while holding the device the door is unlocked, or the ignition switch isThe alarm will stop by unlocking a door by placed in the ACC or ON position, thepushing the UNLOCKbutton on the keyfob(which may have caused the interference) system will not arm. or Intelligent Key, pushing the request switch orseparate from the registered key. using the key. The alarm will not stop if theIf this procedure allows the engine to start, Even when the driver and/or passengersignition switch is placed in the ACC or ONNISSAN recommends placing the regis- are in the vehicle, the system will activateposition. tered key on a separate key ring to avoid with all doors locked with the ignition interference from other devices. switch in the LOCK position. When turningIf the system does not operate as de- the ignition switch to the ACC or ONscribed above, have it checked by a Statement related to section 15 of FCC position, the system will be released.NISSAN dealer. rules for NISSAN Vehicle Immobilizer System (CONT ASSY-BCM. ANT ASSY- IMMOBILISER) Instruments and controls 2-29 Model "F15-D" EDITED: 2010/ 6/ 24

owners manual Nissan Juke

owners manual Nissan Juke - year of production: 2010 - Nissan Juke owners manual EN