Mitsubishi Galant IX 9 owners manual page 94

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Galant, year of production 2003 - 2012:

BK0121200US.book 5 ページ㧞㧜㧝㧜年４月㧝４日　水曜日　午前㧝㧝時㧞４分 Features and controls NOTE Additional keys ●Electronic immobilizer is not compatible with commer- To add a key, you need to register the ID code to the vehicle. cially available remote starting systems. Use of commer-Registering the ID code can be done by your authorized cially available remote starting systems may result in vehicle starting problems and a loss of security protection.Mitsubishi Motors dealer. Or it can be done by yourself (except Use only Mitsubishi Motors authorized accessories.for vehicles sold in Canada). For you to register the ID code yourself, follow the “Customer ●A system failure is suspected when the ignition key is turned to the “START” position, and the engine does not key programming” procedure below. If you choose to have your authorized Mitsubishi Motors start. In such a case, contact an authorized Mitsubishi Motors dealer. dealer register the ID code, take your vehicle and any remain- ing keys to your authorized Mitsubishi Motors dealer. ! CAUTION NOTE ●Do not make any alterations or additions to the ● You are provided with 2 keys, but you may add up to 6 immobilizer system. Alterations or additions could more keys. 3 cause failure of the immobilizer. Customer key programming (Except for vehicles sold in Canada) Replacement keys You can program new keys to the system if you have two valid Only keys that have been programmed to the vehicle electron- (already registered) keys and blank (not registered) immobi- ics can be used to start the vehicle. lizer key (specially cut for your vehicle at your Mitsubishi Motors dealer) by doing the following: 1. Insert the first valid key into the ignition and turn the igni- If you lose a key, you can order a key from your authorized Mitsubishi Motors dealer by referring to the key number.tion to the “ON” position for 5 seconds. To prevent vehicle theft, the ID code for the vehicle keys must2. Turn the ignition to the “LOCK” position and remove the be changed. first key. Take your vehicle and all remaining keys to your authorized3. Within 30 seconds of turning the first key to the “LOCK” Mitsubishi Motors dealer to have your ID code changed. position, insert the second valid key into the ignition and turn it to the “ON” position. About 10 seconds later, the immobilizer indicator will start blinking. 3-5

owners manual Mitsubishi Galant

owners manual Mitsubishi Galant - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Mitsubishi Galant IX 9 owners manual EN