M Power M3 owners manual page 94

text version of content this owner's manual page from owners manual to the vehicle BMW M3 E92, year of production 2007 - 2012:

Maximum cooling 4. Select the desired intensity and press the At outside temperatures above controller. 327/06 and when the engine is The selected intensity level of the auto- running, you obtain a maximum matic program is switched on. cooling effect as soon as possible. The automatic climate control goes into recir-Adjusting air flow rate manually Climate culated-air mode at the lowest temperature. Air Press the left side of the button to flows at maximum rate from the vents for the reduce airflow. Press the right side upper body area. You should therefore open of the button to increase it. them for maximum cooling.You can reactivate the automatic mode for the AUTO program air flow rate with the AUTO button. The air flow rate may be reduced or the blower The AUTO program adjusts the air may be switched off entirely to save on battery distribution to the windshield and power. The display remains the same. side windows, towards the upper body area and into the footwell for you. The air Switching the system on/off flow rate and your temperature specifications With the blower at its lowest setting, press the will be adapted to outside influences as a result left side of the button to switch off the auto- of seasonal changes, e.g. sunlight or window matic climate control. All displays are cleared condensation. except for the rear window defroster if it is The cooling is switched on automatically with switched on. the AUTO program. Press any button except REST or rear window Intensity of the AUTO programdefroster to reactivate the automatic climate control. Press the AUTO button repeatedly to set the intensity of the AUTO program. The current Automatic recirculated-air control setting is briefly displayed on the Control Dis-AUC/Recirculated-air mode play every time the button is pressed.Switch on the desired operating You can also set the intensity of the AUTO pro-mode by pressing this button gram via iDrive. repeatedly: 1. Press the button. > LED off: outside air flows in continuously. This opens the start menu.> Left-hand LED on, AUC mode: a sensor 2. Move the controller to the left to call up "Cli-detects pollutants in the outside air. If nec- mate". essary, the system blocks the supply of out- 3. Select "Automatic programs" and press the side air and recirculates the inside air. As controller. soon as the concentration of pollutants in the outside air has decreased sufficiently, the system automatically switches back to outside air supply. > Right-hand LED on, recirculated-air mode: the supply of outside air is permanently shut off. The system then recirculates the air currently within the vehicle. If condensation starts to form on the inside window surfaces during operation in the recirculated-air mode, you should switch 92

owners manual BMW M3 E92

owners manual BMW M3 E92 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - M Power M3 owners manual EN