Infiniti Q50 owners manual page 93

text version of content this owner's manual page from owners manual to the vehicle Infiniti Q50, year of production 2013:

Front passenger air bag statusrunning, it may indicate a potential emis-appears in the vehicle information dis- light sion control malfunction.play. If the fuel-filler cap is loose or The front passenger air bag status lightThe malfunction indicator light may alsomissing, tighten or install the cap and ( ) located on the instrument panel willcomeonsteadyifthefuel-filler capis loosecontinue to drive the vehicle. The be lit and the passenger front air bag willor missing, or if the vehicle runs out of fuel.light should turn off after a few driving Check to make sure the fuel-filler cap istrips. If thelight does not turn off be OFF depending on how the front after a few driving trips, have the passenger seat is being used.installed and closed tightly, and that the vehicle has at least 3 US gallons (11.4vehicle inspected by an INFINITI retai- For front passenger air bag status lightliters) of fuel in the fuel tank.ler. You do not need to have your operation, see “INFINITI Advanced Air Bag vehicle towed to the retailer. System (front seats)” (P.1-47).After a few driving trips, thelight. Malfunction indicator light blinking — High beam assist indicatorshould turn off if no other potentialAn engine misfire has been detected emission control system malfunction ex-which may damage the emission con- light (if so equipped) ists. trol system. The indicator light illuminates when theIf this indicator light remains on for 20To reduce or avoid emission control headlights come on while the headlightseconds and then blinks for 10 secondssystem damage: switch is in the AUTO position with thewhentheengineisnotrunning,itindicates1) Do not drive at speeds above 45 high beam selected.This indicates that thethat the vehicle is not ready for anMPH (72 km/h). high beam assist system is operational.emission control system inspection/main- (See “High beam assist” (P.2-38).)tenance test. (See “Readiness for Inspec-2) Avoid hard acceleration or decelera- tion/Maintenance (I/M) test (US only)” (P.9-tion. High beam indicator light22).) 3) Avoid steep uphill grades. This light comes on when the headlightOperation: 4) If possible, reduce the amount of highbeamisonandgoesoutwhenthelow cargo being hauled or towed. beam is selected. The malfunction indicator light will comeThe malfunction indicator light may on in one of two ways: stop blinking and remain on. Malfunction Indicator Light. Malfunction indicator light on steady — (MIL) An emission control system malfunc-Have the vehicle inspected by an If the malfunction indicator light comes ontion has been detected. Check the fuel-INFINITI retailer. You do not need to steady or blinks while the engine isfiller cap if the Loose Fuel Cap warninghave your vehicle towed to the retailer. 2-18Instruments and controls

owners manual Infiniti Q50

owners manual Infiniti Q50 - year of production: 2013 - Infiniti Q50 owners manual EN