owners manual Fiat Tipo

all ratings: 0 average rating: 5

To select the "sequential" mode, moveAUTOSTICK-Sequentialslip. This could cause accidents or the lever from D (Drive) to the left: themodepersonal injuries. position + (upper gear) or – (lower gear)In the case of frequent gearshifting (e.g.The vehicle will keep the gear can be reached; these are unstablewhenthevehicle is driven with a heavyselected by the driver until the safety positions, which means that the leverload, on slopes, with strong headwind),conditions allow it. This means, for always returns to the central position.it is recommended to use the Autostickexample, that the system will try to The brake pedal and button 1 fig. 80 on(sequential shifting) mode to select andprevent the engine from switching off, the knob must be pressed to exitkeep a lower fixed ratio.automatically downshifting if the engine position P (Park). In these conditions, using a lower gearspeed is too low. Also to shift from position N (neutral) toimproves vehicle performance andTRANSMISSION position D (drive) or R (reverse), youprolongs the transmission's life, limitingEMERGENCYFUNCTION need to press the brake pedal.gearshifting and preventing overheating.(where provided) IMPORTANTDONOTacceleratewhileIt is possible to shift from position DTransmission operation is constantly shifting from position P (or N) to another(Drive) to the sequential modemonitored to detect any fault. If a position. regardless of vehicle speed.condition that might damage the Activation transmission is detected, the "recovery" IMPORTANTAfter selecting a gear, wait function is activated. a few seconds before accelerating. ThisWith gear lever in position D (Drive), toIn this condition, the transmission stays precaution is particularly important withactivate the sequential drive mode,in 3 th gear, regardless of the selected engine cold. movethelever to the left (– and +gear. indication of the trim). The gearPositions P (Parking), R (Reverse) and N AUTOMATICDRIVING engaged will be shown on the display.(Neutral) still work. Iconmight light MODE Gearshifting is made by moving the To select the automatic driving mode,gear lever forwards, towards symbol –up on the display. you need to shift the gear lever to Dor backwards, towards symbol +.In the case of "recovery" operation (Drive): the best ratio is selected by the immediately contact the nearest Fiat electronic transmission control unitDeactivationDealership. depending on vehicle speed, engineTo deactivate the sequential drivingTemporaryfailure load (accelerator pedal position) andmode, bring the gear lever back toIn the event of a temporary failure, gradient of the road. position D (Drive), automatic mode.correct transmission operation can be DcanbeselectedfromsequentialImportant notes restored for all the forwards gears by operation in any driving conditions.Donotdownshift on slipperyproceeding as follows: surfaces: the drive wheels might losestop the vehicle; grip with following risk for the vehicle to 87

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders