owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 87 d2ureepe, Version: 2.11.8.1 Seats 87 Position 0 Seats Before you press the KEYLESS-GO start/stop Safety notes button, the vehicle’s on-board electronics have status 0 (as with SmartKey removed).GWarning! In order to avoid possible loss of vehicle Position 1 control the following must be done before the vehicle is put into motion: XPress the KEYLESS-GO start/stop button R seat adjustment once. This supplies power for some electrical R head restraint adjustment consumers, e.g. wipers. R steering wheel adjustment iWhen you now open the driver’s door, the R rear view mirror adjustment power supply is switched off. R fastening of seat belts Ignition (or position 2) GWarning! Controls in detail XPress the KEYLESS-GO start/stop button Do not adjust the driver’s seat while driving. twice. Adjusting the seat while driving could cause This supplies power for all electrical the driver to lose control of the vehicle. consumers. Never ride in a moving vehicle with the seat When you switch on the ignition, all lamps backrest in an excessively reclined position as in the instrument cluster come on. The low- this can be dangerous. You could slide under beam headlamp indicator lamp, high-beam the seat belt in a collision. If you slide under headlamp indicator lamp, turn signal it, the seat belt would apply force at the indicator lamps, and the indicator lamps for abdomen or neck. That could cause serious the fog lamps will only come on if activated. or fatal injuries. The seat backrest and seat If a lamp in the instrument cluster fails to belts provide the best restraint when the come on when the ignition is switched on, wearer is in a position that is as upright as have it checked and replaced if necessary. possible and seat belts are properly If a lamp in the instrument cluster remains positioned on the body. on after starting the engine or comes on while driving, refer to “Lamps in instrumentGWarning! cluster” (Y page 304). Your seat must be adjusted so that you can correctly fasten your seat belt. iWhen you now press the KEYLESS-GO Observe the following points: start/stop button once and the driver’s door is open, the power supply is switchedR Adjust the seat backrest until your arms are off. slightly angled when holding the steering wheel. R Adjust the seat to a comfortable seating position that still allows you to reach the accelerator/brake pedal safely. The position should be as far back as possible with the driver still able to operate the controls properly. Z

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders