Nissan Micra March K13 owners manual page 89

text version of content this owner's manual page from owners manual to the vehicle Nissan Micra, year of production 2010:

Black plate (88,1) Ifequipped, when the lever is pulled towards the Type B HEADLIGHTAIMING CONTROL (if rearmost position *3 after the ignition switch isIf the doors are closed and locked with the remoteequipped) placed in the “OFF” or “LOCK” position, the headlight GUID-296812EE-5594-4EEF-8AAB-8F7621ED7AA4 controller, the Intelligent Key or the door requestManual type will turn on and stay on for 30 seconds. The lever canswitch (if equipped) while the headlight switch is in GUID-9F8AA76B-756F-4978-A84C-8355B5128B81 be pulled 4 times for up to 2 minutes. either the or position, the battery saver Daytime light system (if equipped) function will turn off the lights to prevent the battery GUID-7B0C9DCA-8BED-4EF1-B639-2EE198F7C26Afrom being discharged. The lights will turn on when the Even if the headlight switch is off, the daytime lightsdoors are being opened. will come on after starting the engine. However, you cannot change low beam to high beam when the light CAUTION: switch is off. When the light switch is turned to the position, Donotleavethelightsonwhentheengineisnot the headlight low beam will turn off. running for extended periods of time to prevent the battery from being discharged. BATTERYSAVER SYSTEM GUID-E752AA94-699E-48C0-B079-8F35CBAEDA85 SIC2275 The light reminder chime will sound if the driver’s door is opened while the following improper operations The headlight aiming control operates when the occur: ignition switch is in the “ON” position and the headlight . The headlight switch is in either theor is on to allow the headlight axis to be adjusted position, and the ignition switch in the “ACC”, according to the driving condition. “OFF” or “LOCK” position. Whendriving with no heavy load/luggage or driving on . Theheadlight switch is in the “AUTO” position and a flat road, select the normal position “0”. the front or rear fog light (if equipped) is turned on If the number of occupants and load/luggage in the while the ignition switch is in the “ACC”, “OFF” or vehicle changes, the headlight axis may become higher “LOCK” position. than normal. Be sure to turn the headlight switch to the “OFF” If the vehicle is traveling on a hilly road, the headlights position when you leave the vehicle. may directly shine on the rearview and outside mirrors Type A of a vehicle ahead or the windshield of an oncoming When the headlight switch is in the or vehicle, which may obscure other drivers’ vision. position while the engine is running, the lights will To adjust to the proper aiming height, turn the switch automatically turn off after pushing the ignition switch accordingly. The higher the number, designated on the to the “ACC”, “OFF” or “LOCK” position and opening switch, the lower the headlight axis. the driver’s side door. Select the switch position by referring to the following When the headlight switch remains in either the samples. or position after the lights automatically turn off, the lights will turn on when the engine is started. 2-34 Instruments and controls Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

owners manual Nissan Micra

owners manual Nissan Micra - year of production: 2010 - Nissan Micra March K13 owners manual EN