Nissan Cube III 3 owners manual page 89

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (89,1) WARNING See “CRUISE CONTROL” in the “5. StartingMalfunction Indicator Light (MIL) and driving” section. If the supplemental air bag warningFront passenger air bag statusIfthe malfunction indicator light illuminates light is on, it could mean that the front steady or blinks while the engine is running, it air bag, side air bag, curtain air baglight may indicate a potential emission control and/or and/or pretensioner systems will not Continuously Variable Transmission (CVT) mal- The front passenger air bag status light (locatedfunction. operate in an accident. To help avoidon the center of the instrument panel) will be lit injury to yourself or others, have yourand the passenger front air bag will be OFFThe malfunction indicator light may also illumi- vehicle checked by a NISSAN dealer asdepending on how the front passenger seat isnate steady if the fuel-filler cap is loose or soon as possible. being used. missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and INDICATOR LIGHTS For front passenger air bag status light opera-closed tightly, and that the vehicle has at least 3 tion,see“NISSANADVANCEDAIRBAG USgallons (11.4 liters) of fuel in the fuel tank. SYSTEM (front seats)” in the “1. Safety — Cruise indicator light (if soSeats, seat belts and supplemental restraintAfter a few driving trips, thelight should equipped) system” section of this manual.turn off if no other potential emission control system malfunction exists. Cruise main switch indicator: Engine start operation indicatorIf this indicator light remains on for 20 seconds This light illuminates when the cruise controllight (if so equipped)and then blinks for 10 seconds when the engine main switch is pushed. The light turns off when is not running, it indicates that the vehicle is not the main switch is pushed again. When theThis light appears when the selector lever is inready for an emission control system inspection/ cruise indicator light illuminates, the cruisethe P (Park) position. This light means that themaintenance test. (See “READINESS FOR control system is operational.engine will start by pushing the ignition switchINSPECTION/MAINTENANCE (I/M) TEST” in with the brake pedal depressed. You can startthe “9. Technical and consumer information” Cruise malfunction: the engine directly in any position.section.) Ifthe cruise indicator light blinks while theHigh beam indicator lightOperation: engine is running, it may indicate the cruise The malfunction indicator light will illuminate in control system is not functioning properly. HaveThis light illuminates when the headlight highone of two ways: the system checked by a NISSAN dealer.beam is on and goes out when the low beam is selected. . Malfunction indicator light illuminated steady Instruments and controls 2-15 Model "Z12-D" EDITED: 2009/ 9/ 17

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN