owners manual Skoda Fabia

all ratings: 0 average rating: 5

Increasing the speed with the rocker button B Note › Press the rocker button B » Fig. ĝĜ on page ĝĜ into the RES position. › 0he speed will increase continuously, if the rocker button is pressed and held in It is not possible on vehicles fitted with an automatic gearbox to switch on the Ð the RES position. Release the rocker button once the desired speed is reached. cruise control system if the selector lever is in the position P, N or R. 0he set speed is then stored in the memory. Decreasing the speed Storing a speed › 0he stored speed can be reduced by pressing the rocker button B » Fig. ĝĜ on page ĝĜ into the position SE0. Fig. ĝĜ › 0he speed will decrease continuously, if the rocker button is pressed and held 0urn signal and main beam lever: in the SE0 position. Release the rocker button once the desired speed is Rocker switch and switch of the reached. 0he set speed is then stored in the memory. cruise control system › If the rocker button is released at a speed of less than Ęĕ km/h, the speed is not stored and the memory is erased. 0he speed must then be stored again by pressing the rocker button B in the position SE0 after increasing the speed of the vehicle to more than Ęĕ km/h. 0he speed can also be reduced by depressing the brake pedal, which temporarily Ð deactivates the system. First read and observe the introductory information and safety warn- ings on page ĝě. ä Switching off the cruise control system temporarily Storing a speed First read and observe the introductory information and safety warn- › 0urn the switch A » Fig. ĝĜ into the ON position. äings on page ĝě. › After the desired speed has been reached, press the rocker button B into the SE0 position. 0he cruise control system is temporarily switched off by pressing the switch A » Fig. ĝĜ on page ĝĜ into the spring-tensioned position CANCEL or by depress- After you have released the rocker button B out of the position SE0, the speed ing the brake or clutch pedal. you have just stored is maintained at a constant speed without having to depress Ð the accelerator. 0he set speed remains stored in the memory. Briefly press the rocker button B into the position RES to resume the stored Ð speed after the clutch or brake pedal is released. Changing a stored speed First read and observe the introductory information and safety warn- Switching off the cruise control system completely ings on page ĝě. ä First read and observe the introductory information and safety warn- Increasing the speed with the accelerator ings on page ĝě. ä › Depress the accelerator to increase the speed. › Release the accelerator to reduce the speed back down to the preset speed. Ð › 0urn the switch A » Fig. ĝĜ on page ĝĜ into the OFF position. However, if the saved speed is exceeded by more than Ėĕ km/h for a period of more than Ě minutes by depressing the accelerator, the stored speed is deleted from the memory. 0he speed must then be saved again. Starting-off and DrivingĝĜ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders