owners manual Nissan Altima

owners manual Nissan Altima - year of production: 2002, 2003, 2004, 2005, 2006 - Nissan Altima L31 III 3 owners manual EN

Document: pdf (3.51 MB) 256 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Altima, year of production 2002 - 2006:

PROGRAMMINGTROUBLE- CLEARINGTHEPROGRAMMED 1. Locate the training button on the garage DIAGNOSIS INFORMATION door opener motor unit. Exact location and color of the button may vary by garage door If the HomeLinkTdoesnotquicklylearnthehand-Individual buttons cannot be cleared. However,opener brand. If there is difficulty locating held transmitter information:to clear all programming, press and hold the twothe training button, reference the garage ● replace the hand-held transmitter batteriesoutside buttons and release when the indicatordoor opener Owner’s Manual. with new batteries. light begins to flash (approximately 20 seconds).2. Pressthetrainingbuttononthegaragedoor ● position the hand-held transmitter with itsROLLINGCODEPROGRAMMINGopener motor until (which may activate a batteryareafacingawayfromthe training light). HomeLinkT surface. Rolling code garage door openers (or other roll- ing code devices) which are “code protected”NOTE: ● press and hold both the HomeLinkT andand manufactured after 1996, may be deter-Following step 2, there are 30 seconds in hand-held transmitter buttons without inter-mined by the following:which to initiate step 3. ruption. ● ReferencethegaragedooropenerOwner’s ● position the hand-held transmitter 1- 3Manual for verification.3. Firmly press and release the programmed inches (26 - 76 mm) away from the HomeLinkT button a second time to com- HomeLinkT surface. Hold the transmitter in● The hand-held transmitter appears to pro-plete the training process. (Some garage that position for up to 15 seconds. Ifgram the HomeLinkT Universal Transceiverdoor openers may require you to do this HomeLinkT is not programmed within thatbut does not activate the garage door.procedureathirdtimetocompletethetrain- time, try holding the transmitter in another● Press and hold the trained HomeLinkT but-ing.) position – keeping the indicator light in viewton. If the garage door opener has the rollingThe garage door opener should now recognize at all times. code feature, the HomeLinkT indicator lightthe HomeLinkT Universal Transceiver and acti- If you continue to have programming difficulties,will flash rapidly, then remains on after 2vatewhentheHomeLinkTbuttonispressed.The please contact the NISSAN Consumer Affairsseconds. remaining two buttons may now be programmed Department. The phone numbers are located inToprogramtheHomeLinkTUniversalTransceiver(if not yet programmed, follow steps 2 through 4 the Foreword of this manual. to a garage door opener with the rolling codein the “Programming HomeLinkT” procedures feature,followtheseinstructionsaftercompletingearlier in this section). the “Programming HomeLink” (the aid of a sec- ond person may make the following procedures quicker and easier). 2-40 Instruments and controls ZREVIEWCOPY:—2003Altima (l30) Owners Manual (owners) —USA English (nna) 04/21/03—debbieX

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Altima
year of production from: 2002

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.