or
owners manual BMW X1 E84
owners manual BMW X1 E84 - year of production: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - BMW X1 E84 owners manual EN
Document: pdf (6.9 MB) 291 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle BMW X1 E84, year of production 2009 - 2016:
Seite 88
Controls Safety
Operational readiness of airbag system Functional requirements
The system must have been initialized when the
tire inflation pressure was correct; otherwise,
reliable signaling of a flat tire is not ensured. InѪ
itialize the system after each correction of the
tire inflation pressure and after every tire or
wheel change.
System limits
Sudden tire damage
When the ignition is switched on,, refer Sudden serious tire damage caused by
to page 54, the warning lamp comes onexternal influences cannot be indicated in adѪ
briefly to indicate that the entire airbagvance.◀
system and the belt tensioners are operational.
A natural, even pressure loss in all four tires canѪ
not be detected. Therefore, check the tire inflaѪ
Airbag system malfunction tion pressure regularly.
▷ The warning lamp does not light up after theThe system could be delayed or malfunction in
ignition is switched on. the following situations:
▷ Warning lamp remains permanently on. ▷ When the system has not been initialized.
▷ When driving on a snowy or slippery road
Have the airbag system checked without
surface.
delay if there is a malfunction
▷ Sporty driving style: slip in the drive wheels,
In the event of a malfunction in the airbag sysѪ
high lateral acceleration.
tem, have it checked without delay; otherwise,
there is the risk that the system will not function
▷ When driving with snow chains.
as intended even if a sufficiently severe accident
occurs.◀
Status display
The current status of the Flat Tire Monitor can
be displayed on the Control Display, e.g.,
FTM Flat Tire Monitor whether or not the FTM is active.
1. "Vehicle Info"
The concept
2. "Vehicle status"
The system does not measure the actual inflaѪ
3. "Flat Tire Monitor"
tion pressure in the tires.
The status is displayed.
It detects a pressure loss in a tire by comparing
the rotational speeds of the individual wheels
Initialization
while moving.
The initialization process adopts the set inflation
In the event of a pressure loss, the diameter and
tire pressures as reference values for the detecѪ
therefore the rotational speed of the correѪ
tion of a flat tire. Initialization is started by conѪ
sponding wheel change. This is detected and
firming the inflation pressures.
reported as a flat tire.
88
Online Edition for Part no. 01 40 2 914 595 - VI/12
Download PDFClick here to download a pdf file with an instruction manual for BMW X1 E84
year of production from: 2009
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
BMW X1 E84 owners manual
pages 85 - 91
pages 85 - 91
BMW X1 E84 owners manual
page 88 / 291
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOther available language versions of this manual:
- BMW X1 E84 instrukcja PLshow the owner's manual
pdf - 10.21 MB