owners manual Seat Leon

all ratings: 0 average rating: 5

leon_EN.book Seite 85 Donnerstag, 15. April 2010 9:19 09 Cockpit 85 There is a fault in the electromechanical steering system if the lamp does not Electronic Stability Programme (ESP)* «/ « OFF go out or lights up whilst the vehicle is in motion. The warning lamp may appear in two different colours to indicate faults. If it lights yellow, this indi-There are two warning lamps for the electronic stability cates a minor fault. If it lights red, seek workshop assistance immediately, as « lamp provides information concerning programme. The the steering assistance is not working; in this case you should not keep the function and the « OFF provides information on the driving. Stop the vehicle and seek technical assistance. The power steering disconnection status does not work if the battery is flat or if the engine is off (for example, for towing). You should take into account that you will need considerably more Both lamps come on together when the ignition is switched on and should go power than normal to steer the vehicle if the power steering is not working out after approx. 2 seconds, which is how long the function check lasts. correctly or at all. For those vehicles fitted with ESP* the function “Recommended steering This programme includes the ABS, EDL and TCS. This also includes the brake manoeuvre” is included. See ⇒ page 185. assist system (BAS), automatic cleaning of the brake discs and the trailer stability programme (TSP). The warning lamp « has the following functions: Emission control system*  • It flashes when the TCS/ESP is activated when driving. • It will light up continuously if there is a malfunction in the ESP. This warning lamp monitors the exhaust system. • It will also come on if a fault should occur in the ABS because the ESP Warning lamp  flashes: operates in conjunction with the ABS. When there is misfiring that can damage the catalytic converter. Reduce If the ESP warning lamp « lights up and stays on after the engine is started, speed and drive carefully to the nearest qualified workshop to have the this may mean that the control system has temporarily switched off the ESP. engine checked. In this case the ESP can be reactivated by switching the ignition off and then 17) on again. If the warning lamp goes out, this means the system is fully func- The instrument panel displays the following message: EXHAUST GAS SEE tional. WORKSHOP. The « OFF lamp provides information about the disconnection status of the Warning lamp  is lit: system: If a fault has developed during driving which has reduced the quality of the • It stays lit when the TCS is disconnected after pressing the « OFF exhaust gas (e.g. lambda probe fault). Reduce speed and drive carefully to switch. the nearest qualified workshop to have the engine checked. The following message is shown in the instrument panel display: EXHAUST GAS SEE WORKSHOP. 17) Depending on the version of the model. Safety first Operating instructions Practical tips Technical data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders