BMW X3 F25 owners manual page 86

text version of content this owner's manual page from owners manual to the vehicle BMW X3 F25, year of production 2010:

Seite 82 Controls Displays If a collision with a person detected in this wayFor additional information, refer to Dynamic is imminent, the symbol lights up and a signalStability Control DSC, refer to page 123. sounds. DSC Dynamic Stability Control is Orange lights deactivated or DTC Dynamic Traction Control is activated Active Cruise Control Dynamic Stability Control DSC is The number bars shows the selected switched off or Dynamic Traction Con‐ distance from the vehicle driving trol DTC is switched on. ahead. For additional information, refer to Dynamic For additional information, refer to Active Stability Control, refer to page 123, and Dy‐ Cruise Control with Stop & Go function, ACC, namic Traction Control, refer to page 124. refer to page 130. Flat Tire Monitor FTM Vehicle detection, Active Cruise Control The Flat Tire Monitor signals a loss of Illuminated: vehicle driving ahead de‐ tire inflation pressure in a tire. tected. Reduce your speed and stop cau‐ Flashing: the conditions are not ade‐ tiously. Avoid sudden braking and steering ma‐ quate for operating the system. neuvers. The system was deactivated but applies the For more information, see Flat Tire Monitor, re‐ brakes until you actively resume control by fer to page 106. pressing on the brake pedal or accelerator pedal. Tire Pressure Monitor TPM Illuminated: the Tire Pressure Monitor Yellow lights signals a loss of tire inflation pressure Anti-lock Braking System ABS in a tire. Reduce your speed and stop cautiously. Avoid Avoid abrupt braking if possible. Brak‐ sudden braking and steering maneuvers. ing force boost in some cases defec‐ tive. Stop carefully. Take into accountFlashing and then continuously illuminated: no longer brake travel. Have this checkedflat tire or loss of tire inflation pressure can be by the service center immediately. detected. ▷ Interference through systems or devices with the same radio frequency: after leav‐ DSC Dynamic Stability Control ing the area of the interference, the system Flashing: DSC controls the drive and automatically becomes active again. braking forces. The vehicle is stabi‐ ▷ TPM could not conclude the reset: perform lized. Reduce speed and adapt driving the reset of the system again. profile to the driving circumstances. ▷ A wheel without TPM electronics is fitted: Illuminated: DSC failed. Have the system have the service center check it if needed. checked by the service center. ▷ Malfunction: have the system checked by your service center. 82 Online Edition for Part no. 01 40 2 960 386 - II/15

owners manual BMW X3 F25

owners manual BMW X3 F25 - year of production: 2010 - BMW X3 F25 owners manual EN