owners manual Skoda Fabia

all ratings: 0 average rating: 5

1phill start assist First read and observe the introductory information and safety warn- 0he uphill start assist makes it easier to start off on steep hills. 0he system holdsäings on page ĝĖ. the brake pressure produced by the activation of the brake pedal for approx. 0he 0CS is automatically activated after starting the engine. If the wheels are ė seconds after the brake pedal is released. 0he driver can therefore move his slipping, the 0CS adapts the engine speed to the conditions of the road surface. foot from the brake pedal to the accelerator pedal and start off on the slope, 0he 0CS makes it much easier to start off, accelerate and climb steep hills even if without having to actuate the handbrake. 0he brake pressure drops gradually the the conditions of the road surface are unfavourable. more you operate the accelerator pedal. If the vehicle does not start off within ė seconds, it starts to roll back. 0he 0CS should normally always be switched on. It may be advisable to switch off the system in certain exceptional circumstances, such as: 0he uphill start assist is active as of a Ě % slope, if the driver door is closed. It is ›when driving with snow chains; always active on slopes when in forward or reverse start off. 3hen driving down- Ð ›when driving in deep snow or on a very loose surface; hill, it is inactive. ›when it is necessary to “rock a vehicle free” when it has got stuck. Ensure the 0CS is switched on again afterwards. Antilock brake system (ABS) During an intervention of the system, the 0CS warning light  flashes in the in- strument cluster. First read and observe the introductory information and safety warn- äings on page ĝĖ. 0he 0CS warning light  » page ėĘ lights up in the instrument cluster when there is a fault on the 0CS. ABS prevents the wheels locking when braking. 0hus helping the driver to main- tain control of the vehicle. 5ou can switch the 0CS off and on again as you wish by pressing the button  » Fig. ĝę. 0he 0CS warning light  lights up in the instrument cluster when the 0he intervention of the ABS is noticeable from the pulsating movements of the Ð 0CS is switched off. brake pedal which is accompanied by noises. Do not reduce the pressure on the brake pedal during the intervention of the ABS. 0he ABS deactivates if the brake pedal is released. Never interrupt the appli-Electronic Differential Lock (EDS and 4DS) Ð cation of the brakes during the intervention of the ABS! First read and observe the introductory information and safety warn- äings on page ĝĖ. 0raction control system (0CS) If one of the wheels starts to spin, the EDL system brakes the spinning wheel and transfers the driving force to the other wheels. 0his ensures the stability of the Fig. ĝę vehicle and a quick journey. 0CS button 0he EDL switches off automatically if unusually severe stresses exist in order to avoid excessive heat generation in the disc brake on the wheel which is being braked. 0he vehicle can continue to be driven and has the same characteristics as a vehicle not fitted with EDL. 0he EDL switches on again automatically as soon as the brake has cooled down. £ ĝę 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders