Toyota 4Runner 3 III N180 owners manual page 82

text version of content this owner's manual page from owners manual to the vehicle Toyota 4Runner, year of production 1996 - 2002:

(c) Shifting procedure (lever/button type) With A.D.D. SHIFTING BETWEEN “H2” AND “H4” To shift from “H4” to “H2”, push the To shift from “H2” to “H4”, reduce yourTo shift from “H2” to “H4”, reduce your“4WD” button aging to turn it off. speed to less than 80 km/h (50 mph) andspeed to less than 100 km/h (62 mph) andThis can be done at any vehicle speed. move the front drive control lever. You need not depress the clutch pedal. push in the “4WD” button. You need not If you have trouble shifting in cold weath-depress the clutch pedal.If the indicator light does not go off when er, reduce your speed or stop the vehicle you shift the transfer into “H2”, drive and reshift. If the indicator light does not come on when you push in the “4WD” button, drivestraight ahead while accelerating or de- celerating, or drive in reverse. straight ahead while accelerating or de- ! CAUTION celerating. SHIFTING BETWEEN “H2” OR “H4” If the indicator light flashes and the buzzerAND “L4” sounds when you push in the “4WD” but- Never move the front drive control To shift from “H2” or “H4” to “L4”, stop lever if wheels are slipping. Stop theton, reduce your speed or stop the vehiclethe vehicle or reduce your speed to less slipping or spinning before shifting.and reset. than 8 km/h (5 mph). With your foot off the To shift from “H4” to “H2”, simply moveCAUTION accelerator pedal, depress the clutch the front drive control lever. Also, disen-! pedal and move the front drive control le- gage both the free-wheeling hubs for con- ver. Never push the “4WD” button if tinued “H2” use. To shift from “L4” to “H2” or “H4”, de- press the clutch pedal and move the front This can be done at any vehicle speed.wheels are slipping. Stop the slipping or spinning before shifting.drive control lever. When the “4WD” but- If the indicator light does not go off when ton is pushed in, the transfer shifts into “H4”; when the button is left out, the trans- you shift the transfer into “H2”, drive straight ahead while accelerating or de- fer shifts into “H2” celerating, or drive in reverse. This can be done at any vehicle speed. SHIFTING BETWEEN “H4” AND “L4” If the indicator light does not go off when To shift between “H4” and “L4”, stop you shift the transfer into “H2”, drive the vehicle and put the transmission in straight ahead while accelerating or de- “N”. With your foot holding down the brake celerating, or drive in reverse. pedal, move the front drive control lever. 85

owners manual Toyota 4Runner

owners manual Toyota 4Runner - year of production: 1996, 1997, 1998, 1999, 2000, 2001, 2002 - Toyota 4Runner 3 III N180 owners manual EN