owners manual Skoda Kodiaq

all ratings: 0 average rating: 5

Retrieving the saved setting Note ›3ith the ignition off and the driver’s door open-press- the desired memory ■ If the inclination angle of the seat backrest relative to the seat surface is button B. greater than approx. ĖĖĕ°, then it is not possible for safety reasons to save this ›In other cases (e.g. if the ignition is switched on or the driver's door closed), setting in the memory of the electrically adjustable seats or the remote control hold the button. key. ■ On vehicles with personalisation, the driver's seat setting is stored in the ac- Stopping the ongoing adjustment tive user account personalisation » page Ěĕ. ›Press any button on the seat that is to be set. 0he driver's seat can also be stopped by pressing the  button on the radio-operated key. Memory Function of the electrically adjustable seat Note Every time you save new seat and exterior mirror settings for driving forwards, Fig. ĜĖ you must also save the front passenger mirror setting for reversing again. SE0 button and memory buttons Memory function of the remote control key Read and observe on page Ĝĝ first. Every time the vehicle is locked, the driver´s seat and exterior mirror settings are saved and assigned to the key with which the vehicle was locked. After the following unlocking of the vehicle with the same key and opening Read and observe on page Ĝĝ first. the driver’s door, the driver´s seat and exterior mirrors that are saved to this key will be adopted. Among the memory buttons B on the driver's seat, a setting for the driver´s seat and exterior mirror position can be saved » Fig. ĜĖ. 0his function can be activated / deactivated in the Infotainment menu  →  → Seats. Storing seat and exterior mirror settings for driving forward ›Switch on the ignition, adjust the seat and the exterior mirrors, as required.Storing front passenger´s exterior mirror settings for reversing ›Press the  A » Fig. ĜĖ button and then, within Ėĕ seconds, press the de-0he function for lowering the passenger-side mirror surface when reversing sired memory button B . Storing is confirmed by an acoustic signal.can be activated in the Infotainment menu  →  → Mirrors and wipers. ›1nlock the vehicle with the remote control key and switch on the ignition. Storing front passenger´s exterior mirror settings for reversing ›0urn the rotary knob for the exterior mirror control to the position for the 0he function for lowering the passenger-side mirror surface when reversing  front passenger mirror area » page Ĝě. can be activated in the Infotainment menu →  → Mirrors and wipers. ›Engage reverse gear. ›0urn on the ignition and press the desired memory button B » Fig. ĜĖ. ›Adjust the front passenger's mirror to the desired position. ›0urn the rotary knob for the exterior mirror control to the position for the ›Disengage reverse gear. 0he adjusted position of the exterior mirror is stored front passenger mirror area » page Ĝě. in the remote control key memory. ›Engage reverse gear. ›Adjust the front passenger's mirror to the desired position. Stopping the ongoing adjustment ›Disengage reverse gear. 0he set position of the exterior mirror is stored.›Press any button on the driver's seat or the  button on the remote control key. Seats and head restraintsĜĞ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders