owners manual Seat Leon

all ratings: 0 average rating: 5

76 Driver information system Multifunction display memory Personalising the displays The multifunction display is equipped with three memories that work auto-In the Easy Connect system you can adjust which of the possible displays of matically: MFD from departure, MFD from refuelling, MFD total calculation.the MFD can be shown on the instrument panel display with the button  On the screen display, you can read which memory is currently displayed.and the function button Setup ⇒ page 79. To change between memories with the ignition on and the memory shown, Displays press the button  on the windscreen wiper lever or you can also Menu effect change between memories using the button  on the multifunction steer- The current fuel consumption display operates through- ing wheel. Current fuel con- out the journey, in litres/100 km; and with the engine sumption running and the vehicle stopped, in litres/hour. Menu effect After turning on the ignition, average fuel consumption Display and storage of the values for the journey and the in litres/100 km will be shown after travelling approxi- consumption from when the ignition is switched on to Average fuel con- mately 100 metres. Otherwise horizontal lines are dis- when it is switched off. sumption played. The value shown is updated approximately ev- MFD from de- If the journey is continued in less than 2 hours after the ig- ery 5 seconds. parture nition is switched off, the new data is added to the data al- ready stored in the memory. The memory will automatically Approximate distance in km that can still be travelled be deleted if the journey is interrupted for more than two with the fuel remaining in the tank, assuming the same Operating range hours. style of driving is maintained. This is calculated using the current fuel consumption. Display and storage of the values for the journey and the MFD from re- consumption. By refuelling, the memory will be erased au- This indicates the hours (h) and minutes (min) since fuelling Journey duration tomatically. the ignition was switched on. The memory records the values for a specific number of Distance covered in km (m) after switching on the igni- Distance covered partial trips, up to a total of 19 hours and 59 minutes or 99 tion. MFD total cal-hours and 59 minutes, or 1999.9 km (or miles) or 9999 km Whenever you refuel, an automatic check is run on the culation (or miles), depending on the model of instrument panel. quality of the natural gas and is displayed after the ig- a) On reaching either of these limits , the memory is auto- CNG quality nition is switched on. The indication is given as a per- matically erased and starts to count from 0 again. centage of between 70 % and 100 %. The greater the a) percentage, the lower the consumption. It varies according to the type of instrument panel fitted. The average speed will be shown after a distance of ap- Erasing a memory manually proximately 100 metres has been travelled. Otherwise Average speed ● Select the memory that you wish to erase. horizontal lines are displayed. The value shown is up- dated approximately every 5 seconds. ● Press and hold the button  on the windscreen wiper lever or the  Digital display of button on the multifunction steering wheel for about 2 seconds. Current speed displayed in digital format.  speed

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders