or
owners manual Saab 9-5
owners manual Saab 9-5 - year of production: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 - Saab 9 5 I 1 YS3E owners manual EN
Document: pdf (15.34 MB) 272 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Saab 9-5, year of production 1997 - 2005:
78 Instruments and controls
To program a function or to cancel a programmed function, press Calibration
and hold in the relevant button until the corresponding symbol has If the battery has been disconnected or has died, the system will
flashed four times on the display and a chime has sounded. need to be recalibrated.
Make sure the ignition is ON. To start the calibration procedure:
FunctionText displayed on SID Text displayed on SID 1 Start the engine.
during programming when cancelling 2 Press and simultaneously.
program Calibration takes about 30 seconds. During this time and for about
ACC: LO TEMP ACC: NORMAL 3seconds after the operation has been completed, the number of
A/C CTRL A/C CTRL fault codes (if any) stored in the system will appear in the tempera-
ture display on the left. The fault codes themselves will be shown in
ACC: RECIRC ACC: RECIRC the temperature display on the right.
ACC: SPEED CTRLACC: NORMAL CTRLUseful tips
ACC: AUTO ACC: MANUAL (Before driving the car to an authorized Saab dealer)
RDEFR CTRL RDEFR CTRL • If AUTO is not shown on the display, see ”Cancelling the pro-
grammed settings (I)” on page 76.
Example: To have the ACC system switch the heating for the rear • If you suspect that the ACC system is not functioning properly,
window and door mirrors ON/OFF automatically, press and hold in cancel (delete) all programmed settings and then recalibrate the
system.
until the symbol has flashed four times on the display and a See ”Cancelling the programmed settings (I) and (II)”, pages 76
chime has sounded. and 77, and ”Calibration” above.
The display shows: Note that AUTO will show on the display even if you have com-
ACC: AUTO pleted Programming II, but that this does not apply to Program-
RDEFR CTRL ming I.
Once a function has been recorded under ”Programming II”, it will • If the battery has been disconnected or has died, the ACC system
remain in the system until you cancel the program. will need to be recalibrated. See ”Calibration” above.
AUTO will still show on the display after a function has been saved
in ”Programming II”.
Download PDFClick here to download a pdf file with an instruction manual for Saab 9-5
year of production from: 1997
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Saab 9 5 I 1 YS3E owners manual
pages 75 - 81
pages 75 - 81
Saab 9 5 I 1 YS3E owners manual
page 78 / 272
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOther available language versions of this manual:
- Saab 9 5 I 1 YS3E instrukcja PLshow the owner's manual
pdf - 23.01 MB
Others owner's manuals for this model:
Saab 9-5 2005 - 2009 EN - Saab 9-5 FL I 1 owners manual - pdf - 22.3 MB
Saab 9-5 1997 - 2005 PL - Saab 9-5 I 1 YS3E instrukcja - pdf - 23.01 MB
Saab 9-5 2005 - 2009 EN - Saab 9-5 FL I 1 owners manual - pdf - 22.3 MB
Saab 9-5 1997 - 2005 PL - Saab 9-5 I 1 YS3E instrukcja - pdf - 23.01 MB