owners manual Seat Leon

all ratings: 0 average rating: 5

leon_EN.book Seite 73 Donnerstag, 15. April 2010 9:19 09 Cockpit 73 Distance travelled in km Outside temperature display The display shows the distance travelled since the ignition was switched on.The measurement margin ranges from -40°C (-40°F) to +50°C (+125°F). At The maximum display value in both memories is 1999 km. The memory will outside temperatures below +4°C (+39.2°F), “a snowflake symbol” (ice automatically be deleted once this value has been reached. warning) appears in addition to the outside temperature display. This symbol flashes for a few seconds and remains lit until the outside temperature rises Average speed in km/h above +6°C(+42.8°F). The average speed will be shown after a distance of approximately 100 metres has been travelled. Until then dashes will appear in the display. The WARNING display will be updated every 5 seconds while the vehicle is in motion. There could be black ice on the road surface even if the “snowflake symbol” Alternative speed display (mph or km/h) is not shown. For this reason you should not rely exclusively on this display The speed is also displayed in a second unit of measurement other than that - Risk of accident! used on the speedometer. • Select the menu Configuration using the rocker switch on the windscreen Note wiper lever or the buttons on the multifunction steering wheel* ⇒ page 68.• There are different instrument panels; therefore the multifunction display • Select the option Auxiliary speed and press OK on the windscreen wiper may vary. lever or the multifunction steering wheel*. • When the vehicle is stationary or travelling at very low speeds, the Digital display of speed temperature displayed may be slightly higher than the actual outside temper- 8) ature as a result of the heat radiated from the engine. The instrument panel display gives the speed in digital format.• Vehicles with a multifunction steering wheel* do not have buttons on the Speed warning at --- km/h windscreen wiper lever. The multifunction display can only be controlled from This function may help you to keep within the speed limits. Press the OK the buttons on the multifunction steering wheel*. A button on the windscreen wiper lever or the multifunction steering wheel* A to select the current speed. The instrument panel display gives the selected speed, for example, Speed warning 120 km/h . You have five seconds to reset Vehicle status menu B the speed between 30 km/h and 250 km/h using rocker switch or buttons A  or  on the multifunction steering wheel*. Press the OK button or wait This menu shows warning or information texts five seconds until the speed is stored and the warning is activated. If the set speed is exceeded, an acoustic signal is heard and a warning message is Open Vehicle Condition menu displayed until the speed is reduced to at least 4 km/h below the stored – Select the option Vehicle status from the main menu: “Main OK speed. The function is switched off by pressing the button again. Speed menu” and press button OK on the windscreen wiper lever A warning --- km/h is now displayed on the instrument panel. A ⇒page70, fig.45. or Safety first Operating instructions Practical tips Technical data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders