Mitsubishi Lancer VIII 8 owners manual page 73

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Electronic immobilizer (Anti-theft starting system) 3.Within 30 seconds of turning the first key For you to register the ID code yourself, fol- NOTE low the “Customer key programming” proce- to the “LOCK” position, insert the second It is not possible to register a key if: dure below. valid key into the ignition and turn it to the immobilizer display goes off during the the “ON” position. About 10 seconds If you choose to have your authorized Mit- procedure subishi Motors dealer register the ID code,later, the immobilizer display will start to take your vehicle and all remaining keys toblink. the immobilizer display does not come on within 30 seconds after turning the ignition your authorized Mitsubishi Motors dealer. 4.When the immobilizer display starts switch to the “ON” position with a blank blinking, turn the second valid key to the 5 immobilizer key “LOCK” position and remove it. Within NOTE The procedure will be terminated automati- 30 seconds after doing so, insert a blank cally if: You are provided with two keys, but you immobilizer key into the ignition switch may register up to eight keys. a period of 30 seconds or longer elapses and turn it to the “ON” position. Perform from the moment when the first key is turned to the “LOCK” position to the this operation no more than 30 seconds moment when the second key is turned to Customer key programming after the immobilizer display starts blink- the “ON” position (Except for vehicles sold in ing. When registration of the ID code is a period of 30 seconds or longer elapses complete, the immobilizer display will from the moment when the second key is Canada) come on for 3 seconds then go off. If an turned to the “LOCK” position to the N00562201136 error occurs, the immobilizer display will go off during the procedure. moment when the blank immobilizer key is You can program new keys to the system if turned to the “ON” position you have two valid (already registered) keys To use the new remote control transmitters, it and blank (not registered) immobilizer key is necessary to register the key with both the (specially cut for your vehicle at your Mit- electronic immobilizer and keyless entry sys- subishi Motors dealer) by doing the follow- tem. ing: Also refer to “Keyless entry system: Cus- 5.If you wish to register another key, per- tomer remote control transmitter program- form the process again from step 1. ming” on page 5-9. 1.Insert the first valid key into the ignition switch and turn the key to the “ON” posi- tion for 5 seconds. NOTE General information 2.Turn the key to the “LOCK” position and remove the first key. Perform the operation when the interrupt dis- play screen is not showing. The interrupt dis- Your electronic immobilizer operates on a play screen may prevent you from seeing the immobilizer display. radio frequency subject to Federal Communi- cations Commission (FCC) Rules (For vehi- 5-6 Features and controls

owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN