owners manual Skoda Octavia

all ratings: 0 average rating: 5

s43s.1.book Page 70 Thursday, May 13, 2010 1:21 PM 70 Seats and Stowage If you wish to be able to retrieve the settings which are stored in the memory by also Retrieving setting of exterior mirror for reversing* using the radio remote control, you have to assign the radio remote control to a – Turn the rotary knob for the exterior mirror setting into the position   page 65 memory button in each case. before engaging the reverse gear. If you wish, you can obtain an additional remote control key from an authorised Škoda Service partner and then assign the remote control key to another memory button.The mirror returns into its initial position, after the rotary knob is moved out of the position  and put into another position or if the speed is more than 15 km/h. Note Emergency Off  If the radio remote control had previously been assigned to another memory You can interrupt the setting operation at any time, if you operate any button of the button, this setting is then erased by the new assignment. driver seat.  If you assign the radio remote control to a memory button which has already been assigned to a radio remote control, the old assignment is also replaced by a new Note assignment in this case. If the inclination angle of the seat backrest is more than 102° in relation to the seat  The assignment of the radio remote control to a memory button is retained, cushion, the backrest remains in this position, after reaching this angle, when retrieving however, after reassigning the seats and exterior mirrors. the setting by briefly pressing the memory button. Once the stored angle is reached, it is necessary to press the memory button and hold it pressed until the seat is in the Retrieving settings of the seat and mirrors stored position. You can retrieve the stored settings either with the memory buttons or Head restraints with the remote control*. Retrieving settings with memory buttons – In order to retrieve the stored setting, you have two possibilities: B – One-touch automatic memory: briefly press the desired memory button A page69, fig.57. The seat and exterior mirror are moved automatically into the stored positions (this applies only if the ignition is switched on and the speed is less than 5 km/h). B – Memory keying: Press and hold the desired memory button A pressed long enough until the seat and the exterior mirror are moved into the stored positions. Retrieving settings with remote control Fig. 58 Head restraint: Adjust - left / remove - right – If the driver door is closed and the ignition is switched off, briefly press the unlock Best protection is achieved if the top edge of the head restraint is at the same level as button of the radio remote control  page43 and then open the driver door.the upper part of your head. – The seat and exterior mirrors now move automatically into the stored positions.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders