VW Jetta VI 6 Hybrid owners manual page 71

text version of content this owner's manual page from owners manual to the vehicle VW Jetta Hybrid, year of production 2012:

Removing the front head restraints x Sit in the back seat behind the head restraint you want to remove. Pull the head restraint all the way up ⇒ in Adjusting the front and rear head restraints on page 76. Recline the backrest with the head restraint so that there is enough overhead clearance to remove it. x Slide a flat object, such as a plastic credit card, underneath the right side of the cap on the right- hand seat guide rod ⇒ fig. 38 (1) to unlock the head restraint. x Push the flat object (plastic card) in against the guide rod to depress a release button located under the cap (not visible). x Use one hand to hold the release button in with the flat object. With your other hand, lift the sam e guide rod slightly to expose a notch in the rod at the bottom (can be seen and felt with fingers). The right-hand guide rod is now released. x To release the left-hand guide rod, press button(2 ) in (towards guide rod) and hold. x Pull the head restraint out completely while holding button(2 ). Installing the front head restraints x Position head restraint properly over the head restraint guides of the respective seat backrest ad n insert the head restraint into the guides. x Push the head restraint down while pressing button(2 ). x Adjust the head restraint according to the occupant's sizeAd, justing the front and rear head restraints. Removing the rear head restraint x Unlock the backrest of the rear seat bench and fold it forwardLu, ggage compartment. x Pull the head restraint all the way up⇒ . x If necessary, press the flat blade of the screwdriver from the vehicle tool kit into the slit of the trim cap ⇒ fig. 39 (1) in the direction of the arrow and hold it in this position. (2) while a second person pulls out the head restraint completely. x At the same time press button x Fold the backrest of the rear seat bench back so that it locks securely. Reinstalling the rear head restraint x Unlock the backrest of the rear seat bench and fold it forward⇒ page 180, Luggage compartment. x Position head restraint properly over the head restraint guides of the respective seat backrest ad n insert the head restraint into the guides. x Push the head restraint down while pressing button(2 ). x Fold the backrest of the rear seat bench back so that it locks securely. x Adjust the head restraint according to the occupant's sizeAd, justing the front and rear head restraints. WARNING Driving without head restraints or with improperly adjusted head restraints increases the risk of serious injuries in a collision. x Always drive with the head restraints in place and properly adjusted to help minimize the risk of neck injury in a crash. x Always reinstall head restraints as soon as possible so that vehicle occupant asre properly protected.

owners manual VW Jetta Hybrid

owners manual VW Jetta Hybrid - year of production: 2012 - VW Jetta VI 6 Hybrid owners manual EN