owners manual Land Rover Discovery

owners manual Land Rover Discovery - year of production: 1998, 1999, 2000, 2001, 2002, 2003, 2004 - Land Rover Discovery II 2 owners manual EN

Document: pdf (5.88 MB) 211 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Land Rover Discovery, year of production 1998 - 2004:

Interior Mirror & Compass Calibrating the compass Setting the compass Variations in the earth's magnetic field cause changes to occur in the compass reading as the vehicle is driven from one set zone to another. However, it should be noted that magnetic variation between adjacent zones is only 4 degrees, and for most motoring situations, resetting the compass should only be necessary if the vehicle has crossed more than one zone, or calibration was carried out in any zone other than zone 8. Note that the precise points at which the set zones change cannot be accurately plotted and that drivers situated in an area where zones H3055 merge should not need to reset the compass every time the vehicle crosses from one to Turn the starter switch to position II. The mirror another. display should show the letter ‘C’. To set the compass: If 'C' is not displayed, use a ballpoint pen or 1. Identify the appropriate zone for your similar probe to press the button on the location (see the map that follows). underside of the mirror for six seconds until ‘C’ 2. Turn the starter switch to position II. is displayed. The button can then be released 3. Using a ballpoint pen or similar probe, and the compass calibrated as follows: press and hold the button on the Calibrate the compass by driving the vehicle in underside of the mirror until a zone circles at 5 mph (7 km/h) or less (two circles number appears in the display. This will should be sufficient) until the mirror display take approximately 3 seconds (note that shows a direction (‘N’, ‘NE’, ‘E’, ‘SE’, ‘S’, ‘SW’, the compass automatically defaults to ‘W’ or ‘NW’). zone 8). 4. Release the button, then continue Alternatively, the compass will eventually pressing and releasing the button calibrate itself during normal vehicle use, but alternately until the required zone number depending upon the type of driving that is appears in the display. undertaken, this may take considerably longer.5. Once the set zone has been selected, the display reappears (after 10 seconds approx.), and the compass is correctly set for the required zone. 77

Download PDF

Click here to download a pdf file with an instruction manual for Land Rover Discovery
year of production from: 1998

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.