BMW X3 E83 owners manual page 69

text version of content this owner's manual page from owners manual to the vehicle BMW X3 E83, year of production 2003 - 2010:

The corresponding memory button 1 is now The corresponding memory button 1 is now programmed with the signal of the original programmed with the signal of the original hand-held transmitter. hand-held transmitter. The equipment can be used as of ignition If you have questions, please contact key position 2. your BMW Sports Activity Vehicle If the device cannot be operated after Center.< repeated programming, check Clearing the memory buttons whether the original hand-held transmitter At a glance uses an alternating-code system. To do so, Press both outer buttons 1 of the inte- either read the instructions of the original grated universal remote control for approx. hand-held transmitter or press and hold 20 seconds, maintaining pressure until the down the programmed memory button 1 of indicator lamp 2 starts to flash. All three the integrated universal remote control. If memory buttons are cleared. the indicator lamp 2 on the integrated uni-The memory of individual memory versal remote control flashes rapidly for a buttons 1 cannot be cleared. short time then lights up for approx. 2 sec- onds, this indicates that the original hand- held transmitter uses an alternating-code Beverage holders system. In the case of an alternating-code system, program the memory buttons 1 as Front Controls described at the section on alternating- code transmitters.< Alternating-code transmitters Consult the operating instructions of the unit you wish to set when programming the universal remote control. You will find infor- mation there on the possibilities for syn- chronization. When programming hand-held transmitters that employ an alternating code, please Depending on your optional equipment, the Driving tips observe the following supplementary center console contains either one or two instructions: beverage holders. Programming will be easier with the aid of a second person.< Passenger's side* 1. Park your vehicle within the range of the remote-controlled device 2. Program the integrated universal remote control as described above at Fixed-code hand-held transmitters 3. Locate the button at the receiver of the Mobility equipment to be set, e.g. on the drive 4. Press the button on the receiver of the device you want to set up. After step 4, you have approx. 30 seconds for step 5 The beverage holder for the front passen- 5. Press the programmed memory ger is located beneath the air/heating vent. button 1 of the integrated universal remote control three times. 67 Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG Reference

owners manual BMW X3 E83

owners manual BMW X3 E83 - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 - BMW X3 E83 owners manual EN