owners manual Mercedes C

owners manual Mercedes C - year of production: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 - Mercedes Benz C Class W202 owners manual EN

Document: pdf (2.54 MB) 130 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes C, year of production 1993 - 2001:

Automatic Transmission The automatic transmission selects individual gears automatically, dependent upon Selector lever position Program mode selector Accelerator position Vehicle speed The gear shifting is process is contin uously adapted, dependent on the driving style, the driving situation and the road characteristics. Important ! When parking the car or before working on the vehicle with the engine running, firmly depress the parking brake pedal and shift the selector lever into "P". Driving The selector lever is automatically locked while in position "P". To move the selector lever out of position "P", the service brake pedal must be firmly depressed before the shift lock will release. Shift selector leverto the desired position only when the engine is idling normally and the service brake is applied. Do not release the brake until ready to drive. The vehicle may otherwise start creeping when the selector lever is in drive or reverse position. Warning ! It is dangerous to shift the selector lever out of "P" or "N" if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the car could accelerate quickly forward or in reverse. You could lose control of the car and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. Important ! After selecting any driving position from "N" or "P", wait a moment to allow the g ear to fully engage before accelerating, especially when the engine is cold. Accelerator Position Partial throttle = early upshifting = normal acceleration Full throttle = later upshifting = rapid acceleration Kickdown (depressing the accelerator beyond full throttle) = downshifting to a lower gear maximum acceleration. Once the desired speed is attained, ease up on the accelerator - the transmission shifts up again. Selector Lever Positions The automatic gear shifting process can be adapted to specific operating conditions using the selector lever. P - Parking position. The parking position is to be used when parking the vehicle. Engage only with the car stopped. The parking position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always use the parking brake in addition to placing the selector lever in park to secure the vehicle. Note: The electronic key can be removed from the steering lock only with the foot off the brake pedal a nd the selector lever in position "P". With the elec tronic key removed, the selector lever is locked in position "P". R - Reverse gear. Shift to reverse gear only with the car stopped. N - Neutral. No power is transmitted from the engine to the rear axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). Do not engage "N" while driving except to coast when the vehicle is in danger of skidding (e.g. on icy roads, see Winter driving Instructions in Index).

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes C
year of production from: 1993

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.