Suzuki SX4 owners manual page 68

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4, year of production 2006 - 2014:

Lighting/Turn Signal Control Lever: 8 STEERING COLUMN CONTROLS • If the keyless start system red indicatorIf you leave any of the doors open with the• Automatic transaxle vehicle ignition switch in the “ACC” position for a To turn the ignition switch, push the light illuminates, the remote controller switch. while (and no key inserted), the engine may not be in the vehicle or the battery of the remote controller may be unreli-may not start when you turn the ignition ACC (2) able. switch to “START”. If the engine does not start, close all doors completely or turn theAccessories such as the radio can oper- NOTE: ignition switch back to the “LOCK” position,ate, but the engine is off. then start the engine. • If the battery of the remote controller runs down or there are strong radio ON (3) waves or noise, the operating range mayThe ignition switch has the following four This is the normal operating position. All be narrower or the remote controller maypositions: electrical systems are on. be inoperative. • If the remote controller is too close to theLOCK (1) START (4) door glass, it may not operate.This is the normal parking position. It is theThis is the position for starting the engine using the starter motor. The switch should • The ignition switch may not turn whonenly position in which the key can be removed. It locks the ignition, and preventsbe released from this position as soon as the remote controller is on the instru- ment panel, in the glove box, in a stor-normal use of the steering wheel.the engine starts. age compartment, in the sun visor or onFor vehicles with an automatic transaxle, the floor. the gearshift lever must be in the “P” (Park)Ignition switch reminder position to turn the key to the “LOCK” posi-(When using the keyless start system) CAUTION tion. A buzzer sounds intermittently to remind The remote controller is a sensitive you to return the ignition switch to the “LOCK” position if it is in the “ACC” position electronic instrument. To avoid dam-To release the steering lock, turn the igni- when the driver’s door is opened. aging the remote controller:tion switch clockwise to one of the other • Do not expose it to impacts, mois- positions. If you have trouble turning the Ignition key reminder ture or high temperature such as byignition switch to unlock the steering, try (When using the ignition key) leaving it on the dashboard under turning the steering wheel slightly to the direct sunlight. right or left while turning the switch.A buzzer sounds intermittently to remind • Keep the remote controller away you to remove the ignition key if it is in the • Manual transaxle vehicle ignition switch when the driver’s door is from magnetic objects such as a You must push in the ignition switch toopened. television. turn it from the “LOCK” position to the “ACC” position. To return to the “LOCK” You can also turn the ignition switch by inserting the ignition key into the slot.position from the “ACC” position, turn the ignition switch counterclockwise while pushing in the switch. 3-3 80J22-03E

owners manual Suzuki SX4

owners manual Suzuki SX4 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Suzuki SX4 owners manual EN