owners manual KIA Optima

all ratings: 0 average rating: 5

5. Maximum permissible inflation Tread wear WARNING pressure The tread wear grade is a comparative This number is the greatest amount of rating based on the wear rate of the n Tire age air pressure that should be put in the tire when tested under controlled con‐ Tires degrade over time, even when tire. Do not exceed the maximum per‐ ditions on a specified government test they are not being used. missible inflation pressure. Refer to the course. For example, a tire graded 150 Regardless of the remaining tread, Tire and Loading Information label for would wear one-and-a half times (1½) we recommend that tires be re‐ recommended inflation pressure. as well on the government course as a placed after approximately six (6) tire graded 100. years of normal service. Heat caused6. Maximum load rating The relative performance of tires de‐ by hot climates or frequent high This number indicates the maximum pends upon the actual conditions of loading conditions can accelerate the Maintenance load in kilograms and pounds that can their use, however, and may depart sig‐ aging process. Failure to follow this be carried by the tire. When replacing nificantly from the norm due to varia‐ warning can result in sudden tire the tires on the vehicle, always use a tions in driving habits, service practices failure, which could lead to a loss of tire that has the same load rating as and differences in road characteristics control and an accident involving se‐ the factory installed tire. and climate. rious injury or death. These grades are molded on the side- 7. Uniform tire quality grading walls of passenger vehicle tires. The Quality grades can be found where ap‐ tires available as standard or optional 4. Tire ply composition and material plicable on the tire sidewall between 8 equipment on your vehicle may vary The number of layers or plies of rub‐ tread shoulder and maximum section with respect to grade. ber- coated fabric in the tire. Tire man‐ width. ufacturers also must indicate the ma‐ For example: Traction - AA, A, B & C terials in the tire, which include steel, TREADWEAR 200 The traction grades, from highest to nylon, polyester, and others. The letter TRACTION AA lowest, are AA, A, B and C. Those "R" means radial ply construction; the TEMPERATURE A grades represent the tire’s ability to letter "D" means diagonal or bias ply stop on wet pavement as measured construction; and the letter "B" means under controlled conditions on specified belted-bias ply construction. government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. 8-73

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders