owners manual Toyota Auris

all ratings: 0 average rating: 5

7-2. Steps to take in an emergency659 If the tire is inflated to more than the specified air pressure (type A) 1 Disconnect the hose from the valve. 2 Install the air release cap to the end of the hose and push the protrusion on the air release cap into the tire valve to let some air out. 3 Disconnect the hose from the valve, remove the air release cap from the hose and then reconnect the hose. 4 Turn the compressor switch on and wait for several seconds, and then turn it off. Check that the air pressure indicator shows the specified air pressure. If the air pressure is under the designated pressure, turn the compressor switch on again and repeat the inflation procedure until the specified air pressure is reached. If the tire is inflated to more than the specified air pressure (type B) 1 Press the button to let some air out. 7 W 2 Check that the air pressure indicator shows the specified air pressure.hen If the air pressure is under the designated pressure, turn the compressor troub switch on again and repeat the inflation procedure until the specified airle pressure is reached. arise The valve of a tire that has been repaired s After a tire is repaired with the emergency tire puncture repair kit, the valve should be replaced. UK_AURIS/AURIS_HV_EE (OM12E33E)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders