owners manual Ford Fiesta

all ratings: 0 average rating: 5

Security You must have two previously Programming a Spare Intelligent programmed coded keys and the new Access Key unprogrammed key readily accessible. See See your authorized dealer to have your authorized dealer to have the spare additional keys programmed to your key programmed if two previously vehicle. programmed coded keys are not available. Read and understand the entire procedure ANTI-THEFT ALARM before you begin. 1. Insert the first previously programmed Alarm System coded key into the ignition. 2. Switch the ignition from off to on. Keep The perimeter alarm is a deterrent against the ignition on for at least three unauthorized access to your vehicle seconds, but no more than 10 seconds. through the doors and the hood. It also 3. Switch the ignition off and remove the protects the audio unit. first coded key from the ignition. Triggering the Alarm 4. After three seconds but within 10 Once armed, the alarm is triggered in any seconds of switching the ignition off, of the following ways: insert the second previously coded key into the ignition. • If someone opens a door, the liftgate 5. Switch the ignition from off to on. Keep or the hood without a valid key or the ignition on for at least three remote control. seconds, but no more than 10 seconds. • If someone removes the audio or 6. Switch the ignition off and remove the navigation system. second previously programmed coded • If you switch the ignition on without a key from the ignition. valid key. 7. After three seconds but within 10 If the alarm is triggered, the alarm horn will seconds of switching the ignition off sound for 30 seconds and the hazard and removing the previously warning flasher will flash for five minutes. programmed coded key, insert the new Any further attempts to perform one of the unprogrammed key into the ignition. above will trigger the alarm again. 8. Switch the ignition from off to on. Keep Arming the Alarm the ignition on for at least six seconds. 9. Remove the newly programmed coded To arm the alarm, lock your vehicle. See key from the ignition. Locks (page 54). If the key has been successfully Disarming the Alarm programmed it will start the engine and operate the remote entry system (if the Vehicles Without Keyless Entry new key is an integrated keyhead transmitter). Disarm and silence the alarm by unlocking If programming was not successful, wait the doors with the key and switching the 10 seconds and repeat Steps 1 through 8. ignition on with a correctly coded key or If you are still unsuccessful, take your unlocking the doors with the remote vehicle to your authorized dealer. control. 62 Fiesta (CCT)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders