or
owners manual Peugeot 1007
owners manual Peugeot 1007 - year of production: 2004, 2005, 2006, 2007, 2008, 2009 - Peugeot 1007 owners manual EN
Document:
pdf (3.22 MB) 132 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Peugeot 1007, year of production 2004 - 2009:
152 - Practical information Practical information - 153
- Do not forget to fully tighten the
spare wheel carrier retaining bolt.
- Stow the tools in the case, then put
it back in the left boot trim.
For your safety, always
change a wheel:
- on level, stable and non-slippery
ground,
- with the handbrake applied,
- with irst or reverse gear engaged (po-
Removing a wheel Reitting the wheel sition R for the "2 Tronic" gearbox),
- with the vehicle chocked,
- Place the chock 2 at the rear of - Position the wheel using the cen-- never go underneath a vehicle raised
the wheel diagonally opposite the tring guide 7.using a jack (use an axle stand).
wheel to be changed. - Lightly pre-tighten the bolts using
- Remove the wheel trim, using the the wheelbrace 3.
wheelbrace 3 (large model) or the - Compress the jack 1 and release it.
wheel trim removal tool 5 (small - Fully tighten the bolts using the After changing the wheel
model), by pulling at the valve pas-wheelbrace.- Have the tightening of the bolts
sage hole. - Replace the trim, starting at the and the pressure of the spare tyre
- Remove the chrome-plated bolt valve passage hole, and press it on checked as soon as possible by a
covers and the plastic cover from using the palm of the hand.PEUGEOT dealer.
the bolts using the "bolt cover" tool 6 - Do not exceed its maximum au-
(Special features of alloy wheels).Replacing the wheelthorised speed: 50 mph (80 km/h).
- Slacken the wheel bolts.in the carrier - Have the punctured tyre repaired
- Place the jack 1 under one of the - Replace the jack 1 and the chock 2 and replace it on the vehicle as
four locating points on the sub-in the box.soon as possible.
frame A closest to the wheel to be - Replace the wheel in the carrier.- 15 and 16 inch punctured wheels
changed. Ensure that the entire cannot be placed in the carrier.
surface of the jack base plate is in - Lift the wheel then the carrier and
contact with the ground.reposition the hook.
- Extend the jack, completely unscrew
the bolts and remove the wheel.
01-10-200501-10-2005
Download PDF
Click here to download a pdf file with an instruction manual for Peugeot 1007
year of production from: 2004
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Peugeot 1007 owners manual
pages 60 - 66
Peugeot 1007 owners manual
page 63 / 132
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF