Mercedes Benz CL C216 2014 owners manual page 60

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Occupant safety 58 X Adjust the seat and move the backrest to If the driver's seat belt is no tf astened when an almos tv ertical position (Y page 96). the engine is started, an additional warning tone will sound. The warning tone goes out X Pull the seat belt smoothly through belt after approximately six seconds or once the sash guide :. driver's seat belt is fastened. X Without twisting it, guide the shoulder If after six seconds the driver's or front- section of the seat belt across the middle passenger seat belt is no tf astened and the of your shoulder and the lap section across doors are closed, the 7 seat belt warning your hips. Safety lamp will remain lit: X Engage belt tongue ; in buckle =. R until the driver's or fron tp assenger's seat X If necessary, pull upwards on the shoulder belt is fastened section of the seat belt to tighten the belt R once the vehicle has exceeded a speed of across your body. 15 mph (25 km/h), in addition a warning All seat belts except the driver's seat belt are tone will sound with increasing intensity for equipped with a special seat belt retractor to up to 60 seconds or until the driver's or securely fasten child restraint systems in the front-passenger seat belt is fastened. vehicle. For further information about special If the driver or fron tp assenger unfastens their seat belt retractors, see (Y page 61). seat belt during the journey, the 7 seat For more information about releasing the seat belt warning lamp lights up and the warning belt with release button ?, see "Releasing tone sounds again. seat belts" (Y page 58). The warning tone ceases after 60 seconds eve nift he driver or front passenger has still Releasing seat belts not fastened their seat belt. The 7 seat X Press release button ?(Y page 57) and belt warning lamp stops flashing, but remains guide belt tongue ; back towards belt lit. sash guide :. After the vehicle has come to a stop, the warning tone will be reactivated and the ! Make sure that the seat belt is fully rolled 7 seat belt warning lamp will flash again up. Otherwise, the seat belt or belt tongue once the vehicle has exceeded a speed of will be trapped in the door or in the seat 15 mph (25 km/h). mechanism. This could damage the door, The 7 seat belt warning lamp will not go the door trim panel and the seat belt. out until: Damaged seat belts can no longer fulfill R their protective function and must be both the driver and the front passenger replaced. Visit a qualified specialist have fastened their seat belts. workshop. or R the vehicle is stationary and a door is open. Belt warning for the driver and front i For more information on the 7 seat passenger belt warning lamp, see "Warning and Regardless of whether the driver's and front- indicator lamps in the instrument cluster, passenger seat belts have already been seat belt" (Y page 389). fastened, the 7 seat belt warning lamp will light up for six seconds each time the engine is started. It then goes out if the driver and the fron tp assenger have fastened their seat belts.

owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN