owners manual Jeep Wrangler

owners manual Jeep Wrangler - year of production: 1997 - Jeep Wrangler TJ 2013 owners manual EN

Document: pdf (5.42 MB) 666 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Wrangler, year of production 1997:

596 MAINTAINING YOUR VEHICLE 4. Place the shift lever momentarily into each gear posi-NOTE: tion (allowing time for the transmission to fully en-• The holes in the dipstick will be full of fluid if the gage in each position), ending with the shift lever inactual level is at or above the hole. PARK. 5. Removethedipstick, wipe it clean and reinsert it until• If it is necessary to check the transmission below the seated. operating temperature, the fluid level should be be- tween the two COLD (lower) holes on the dipstick 6. Remove the dipstick again and note the fluid level onwith the fluid at approximately 80° F (27° C). If the bothsides. The fluid level reading is only valid if therefluid level is correctly established at 80° F (27° C), it is a solid coating of oil on both sides of the dipstick.should be between the HOT (upper) reference holes The fluid level should be between the HOT (upper)whenthetransmissionreaches 180° F (82° C). Remem- reference holes on the dipstick at normal operatingber it is best to check the level at the normal operating temperature.Ifthefluidlevelislow,addfluidthroughtemperature. the dipstick tube to bring it to the proper level. Do not overfill. After adding any quantity of oil through the dipstick tube, wait a minimum of two minutes for the oil to fully drain into the transmission before recheck- ing the fluid level.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Wrangler
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.