owners manual Hyundai i40

all ratings: 0 average rating: 5

Maintenance Headlight (Low/High), static bending light and turn signal light Low 1.Turn off the engine and open the bon- net. 2. Remove the front bumper. 3. Remove the headlight assembly from the body of the vehicle. If you can reach the bulb without removing the headlight assembly, you do not need to do step 2 and 3. High 4. Disconnect the power connector(s) from the back of the headlight assem- static bending OVF075030 bly. OVF075056K Headlight, position light, turn sig- Headlight (Low/High) and nal light and front fog light bulb Static bending light replacement 5. Remove the headlight bulb cover by (1) Headlight (Low) turning it counterclockwise. Headlight (High, if equipped) 6. Disconnect the headlight bulb socket- - for HID, HID AFLS type connector. (2) Static bending light 7. Remove the socket from the assembly (3) Headlight (High) by turning the socket counterclockwise Flashing headlight until the tabs on the socket align with - HID, HID AFLS (if equipped) the slots on the assembly. (4) Front turn signal light 8. Pull the bulb out of the socket. (5) Position light 9. Insert a new bulb into the socket. (6) Dedicated lamp (DRL) (if equipped) 10. Install the socket in the assembly by (7) Front fog light (if equipped) aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 761

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders