owners manual Chrysler Voyager

all ratings: 0 average rating: 5

WHATTODOINEMERGENCIES 573 3. Align the valve notch in the wheel cover with the6. Finish tightening the lug nuts. Push down on the valve stem on the wheel. Install the cover by hand,wrench while at the end of the handle for increased snapping the cover over the two lug nuts. Do not useleverage. Tighten the lug nuts in a star pattern until a hammer or excessive force to install the cover.each nut has been tightened twice. The correct tight- 4. Install the remaining lug nuts with the cone shapedness of each lug nut is 100 ft/lbs (135 N·m). If in doubt end of the nut toward the wheel. Lightly tighten theabout the correct tightness, have them checked with a lug nuts. torque wrench by your authorized dealer or service station. WARNING! 7. After 25 miles (40 km) check the lug nut torque with a To avoid the risk of forcing the vehicle off the jack,torque wrench to ensure that all lug nuts are properly do not tighten the wheel nuts fully until the vehicleseated against the wheel.6 hasbeenlowered.FailuretofollowthiswarningmayVehicles Without Wheel Covers result in personal injury. 1. Mount the road tire on the axle. 5. Lower the vehicle to the ground by turning the jack2. Install the remaining lug nuts with the cone shaped handle counterclockwise. end of the nut toward the wheel. Lightly tighten the lug nuts.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders