owners manual Jeep Wrangler

owners manual Jeep Wrangler - year of production: 1997 - Jeep Wrangler TJ 2013 owners manual EN

Document: pdf (5.42 MB) 666 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Wrangler, year of production 1997:

572 MAINTAINING YOUR VEHICLE 4. Approximately15secondslater,oneoftwothingswillRegardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal • The MIL will flash for about 10 seconds and thenvehicle operation you should have your vehicle serviced return to being fully illuminated until you turn OFFbefore going to the I/M station. The I/M station can fail the ignition or start the engine. This means that youryour vehicle because the MIL is on with the engine vehicle’s OBD II system is not ready and you shouldrunning. not proceed to the I/M station. REPLACEMENTPARTS • The MIL will not flash at all and will remain fullyUse of genuine MOPAR® parts for normal/scheduled illuminated until you turn OFF the ignition or start themaintenance and repairs is highly recommended to en- engine. This means that your vehicle’s OBD II systemsure the designed performance. Damage or failures is ready and you can proceed to the I/M station.caused by the use of non-MOPAR® parts for mainte- If your OBD II system is not ready, you should see yournance and repairs will not be covered by the manufac- authorized dealer or repair facility. If your vehicle wasturer’s warranty. recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD II system to update. A recheck with the above test routine may then indicate that the system is now ready.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Wrangler
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.