owners manual Lexus CT200h

all ratings: 0 average rating: 5

CT200h_OM_OM76135E_(EE).book Page 569 Friday, May 30, 2014 11:14 AM 8-2. Steps to take in an emergency569 9 Close the exclusive jump starting terminal cover, and reinstall the fuse box cover to its original position. Once the hybrid system starts, have the vehicle inspected at any authorized Lexus dealer or repairer, or another duly qualified and equipped professional as soon as possible. ■Starting the hybrid system when the 12-volt battery is discharged The hybrid system cannot be started by push-starting. ■To prevent 12-volt battery discharge ●Turn off the headlights and the audio system while the hybrid system is off. ●Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic. ■When the 12-volt battery is removed or discharged ●The hybrid system may not start. (→P. 465) ●If the 12-volt battery discharges while the shifpt osition is in P, it may not be possible to shift the shift position to other positions. In this case, the vehicle cannot be towed with- out lifting both front wheels because the front wheels will be locked. (→P. 510) ●When the 12-volt battery is reconnected, start the hybrid system and confirm that the shift position can be changed to each position using the shift position indicator. ●Make sure that the key is not inside the vehicle when recharging or replacing the 12- volt battery. The key may be locked int he vehicle if the alarm is activated. (→P. 85) ■Charging the 12-volt battery The electricity stored in the 12-volt battery will discharge gradually even when the vehicle is not in use, due to natural discharge and the draining effects of certain electrical appli- ances. If the vehicle is left for a long time, the 12-volt battery may discharge, and the hybrid system may be unable to start. (The 12-volt battery recharges automatically while the hybrid system is operating.) WARNING ■Avoiding 12-volt battery fires or explosions 8 Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the 12-volt battery: W h ●Make sure each jumper cable is connected to the correct terminal and that it is not en unintentionally in contact with any other than the intended terminal. t r o ●Do not allow the other end of the jumper cable connected to the “+” terminal to comeu b l e into contact with any other parts or metal surfaces in the area, such as brackets or unpainted metal. ar i s ●Do not allow the + and - clamps of the jumper cables to come into contact with eache other. s ●Do not smoke, use matches, cigarette lighters or allow open flame near the 12-volt battery. CT200h_OM_OM76135E_(EE)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders