or
owners manual Mercedes ML
owners manual Mercedes ML - year of production: 2005, 2006, 2007, 2008, 2009, 2010, 2011 - Mercedes Benz ML W164 owners manual EN
Document:
pdf (12.94 MB) 585 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Mercedes ML, year of production 2005 - 2011:
Technical data
Fuels, coolants, lubricants
Coolants If the antifreeze mixture is effective to To provide important corrosion protection,
-22°F (-30°C), the boiling point of the cool-the solution must be at least 45% anticor-
The engine coolant is a mixture of water ant in the pressurized cooling system is rosion/antifreeze (equivalent to freeze
and anticorrosion/antifreeze, which reached at approximately 266°F (130°C).protection to approx. - 22°F [-30°C]). If
provides: The coolant solution must be used year you use a solution that is more than 55%
Corrosion protection round to provide the necessary corrosion anticorrosion/antifreeze (freeze protec-
protection and increase boil-over protec-tion to approx. - 49°F [-45°C]), the engine
Freeze protection tion. Refer to Maintenance Booklet for temperature will increase due to the lower
Boiling protection (by increasing the replacement interval.heat transfer capability of the solution.
boiling point) Therefore, do not use more than this
Coolant system design and coolant used amount of anticorrosion/antifreeze.
The cooling system was filled at the factory determine the replacement interval. The
with a coolant providing freeze protection replacement interval published in the If the coolant level is low, water and
to approximately -35°F (-37°C) and corro-Maintenance booklet is only applicable if MB325.0 anticorrosion/antifreeze should
sion protection. MB325.0 anticorrosion/antifreeze solu-be used to bring it up to the proper level
tion or other Mercedes-Benz approved (have cooling system checked for signs of
!Add premixed coolant solution only. Adding products of equal specification (see leakage). Please make sure the mixture is
water and MB 325.0 Anticorrosion/Antifreeze in accordance with label instructions.
separately from each other, could cause engine Factory Approved Service Products
damage not covered by the pamphlet) are used to renew the coolant The water in the cooling system must meet
Mercedes-Benz Limited Warranty.concentration or bring it back up to the minimum requirements, which are usually
proper level. satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult an authorized Mercedes-Benz Light
Truck Center.
549
Download PDF
Click here to download a pdf file with an instruction manual for Mercedes ML
year of production from: 2005
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Mercedes Benz ML W164 owners manual
pages 547 - 553
Mercedes Benz ML W164 owners manual
page 550 / 585
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF