owners manual BMW 3 E36

owners manual BMW 3 E36 - year of production: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 - BMW 3 E36 owners manual EN

Document: pdf (3.7 MB) 179 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle BMW 3 E36, year of production 1990 - 2000:

54 Steering/ignition lock Starting the engine 1 Steering lock disengaged Before starting You will often find that it is easier to turn d Apply the parking brake. 3 the ignition key from position 0 to 1 if you d The manual-shift gear lever should move the steering wheel slightly to help be in neutral; the automatic transmis- disengage the lock. sion selector lever should be in P 2 2 Ignition on or N. All electrical equipment and accesso- d At low temperatures keep the clutch 1 ries are available for use. pedal depressed. 0 d Start the engine without depressing 360de009 3 Starter activation the accelerator. 0 Steering lock engaged bVehicles with manual transmis- bDo not operate the starter too briefly, sion: depress the clutch pedal while but not longer than approx. 20 seconds. The key can only be inserted and you turn on the ignition, otherwise a Release the ignition key as soon as the removed in this position. blocking system will prevent the engine engine starts. Do not allow the engine to After extracting the key, turn the steer-from starting.c warm up by leaving it running while the ing wheel a small amount to the left or vehicle remains stationary. Instead, drive right until you hear the lock engage. off immediately at a moderate engine Your vehicle is equipped with an inter- speed.c lock; this means that the ignition key Should the engine fail to start on the first can not be turned into position 0 and attempt, e.g., if it is very hot or cold: removed until the selector lever is in d Stop and pause briefly before repeat- position P. ing the starting procedure. This pre- Furthermore, the selector lever is locked vents the spark plugs from becoming in position P when the ignition key is in damp. position 0 or removed from the ignition d Press the accelerator pedal halfway switch. down while engaging the starter. To turn the key back into position 0 or remove it, move the selector lever into position P first. Online Edition for Part No. 01 41 9 790 377 - © 07/98 BMW AG

Download PDF

Click here to download a pdf file with an instruction manual for BMW 3 E36
year of production from: 1990

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.