BMW X5 X6 F15 F16 owners manual page 55

text version of content this owner's manual page from owners manual to the vehicle BMW X5 X6 F15 F16, year of production 2013:

Seite 55 Adjusting Controls To maintain the long-term accuracy of this Unbuckling the belt function, the driver's seat must be calibrated if 1. Hold the belt firmly. a corresponding message is displayed on the 2. Press the red button in the belt buckle. Control Display. 3. Guide the belt back into its reel. The shoulder strap's anchorage point will beCalibrating driver's seat correct for adult seat occupants of every build The warning lamp lights up. A mesѪ if the seat is correctly adjusted, refer to sage also appears on the Control DisѪ page 49. play. Please calibrate the driver's The two rear safety belt buckles integrated seat. into the rear seat are for passengers sitting on 1. Move the driver's seat forward until it the left and right. The belt buckle embossed stops. with the word CENTER is intended exclusively for use by passengers riding in the center posiѪ2.Move the driver's seat forward again. It tion. briefly moves toward the front in the procѪ ess. Safety belt reminder for the driver's 3. Set the desired seating position again. and front passenger seat The calibration is completed when the mesѪ The indicator lamp lights up and a sage on the Control Display disappears. signal sounds. In addition, a message Should this message continue to be displayed, appears on the Control Display. repeat the calibration. If the message does not Check whether the safety belt has been fasѪ disappear even after repeated calibration, have tened correctly. the system checked as soon as possible. The safety belt reminder is active at speeds Do not carry out calibration while the veѪ above approx. 5 mph/8 km/h. It can also be acѪ hicle is moving tivated if objects are placed on the front pasѪ Never carry out calibration while the vehicle is senger seat. moving, as this can cause accidents. Make sure that no persons or objects become Damage to safety belts wedged during the calibration process, as this In the case of strain caused by accidents or can cause injuries or damage.◀ damage: Have the safety belts, including the safety belt tensioners, replaced and have the belt anchors Head restraints checked. Checking and replacing safety belts Correctly adjusted head restraints A correctly adjusted head restraint reduces the Have the work performed only by your risk of spinal injury in the event of an accident. service center; otherwise, it cannot be ensured that this safety feature will function properly.◀ Adjusting the head restraint Correctly adjust the head restraints of all Belt-force limiter occupied seats; otherwise, there is an inѪ The effect of the belt-force limiter on the drivѪcreased risk of injury in an accident.◀ er's seat is dependent on the position of the driver's seat. 55 Online Edition for Part no. 01 40 2 918 440 - III/13

owners manual BMW X5 X6 F15 F16

owners manual BMW X5 X6 F15 F16 - year of production: 2013 - BMW X5 X6 F15 F16 owners manual EN