text version of content this owner's manual page
from owners manual to the vehicle Chevrolet Silverado, year of production 1998 - 2006:
(b) Visually inspect front and rear suspension and(f) Lubricate all key lock cylinders, body door hinges,
steering system for damaged, loose or missing parts,hood latch assembly, secondary latch, pivots, spring
signs of wear or lack of lubrication. Inspect poweranchor, release pawl, tailgate hinges, tailgate linkage,
steering lines and hoses for proper hook-up, binding,tailgate handle pivot points, latch bolt, fuel door
leaks, cracks, chafing, etc. Visually check constanthinge, locks and folding seat hardware. More frequent
velocity joints, rubber boots and axle seals for leaks.lubrication may be required when exposed to a corrosive
(c) Visually inspect hoses and have them replacedenvironment. Applying silicone grease on weatherstrips
if they are cracked, swollen or deteriorated. Inspect allwith a clean cloth will make them last longer, seal
pipes, fittings and clamps; replace with genuine GMbetter and not stick or squeak.
parts as needed. To help ensure proper operation,(g) Check vent hose at transfer case for kinks and
a pressure test of the cooling system and pressureproper installation.
cap and cleaning the outside of the radiator and(h) Change automatic transmission fluid and filter if the
air conditioning condenser is recommended at leastvehicle GVWR is over 8600 lbs or if the vehicle is
once a year. mainly driven under one or more of these conditions:
(d) Visually inspect wiper blades for wear or cracking.− In heavy city traffic where the outside temperature
Replace blade inserts that appear worn or damagedregularly reaches 90°F (32°C) or higher.
or that streak or miss areas of the windshield.− In hilly or mountainous terrain.
(e) Make sure the safety belt reminder light and all your− When doing frequent trailer towing.
belts, buckles, latch plates, retractors and anchorages− Uses such as found in taxi, police or delivery
are working properly. Look for any other loose orservice.
damaged safety belt system parts. If you see anything
that might keep a safety belt system from doing its(i) Drain, flush and refill cooling system. This service
job, have it repaired. Have any torn or frayed safety beltscan be complex; you should have your dealer perform
replaced. Also look for any opened or broken airbagthis service. See Engine Coolant on page 5-35 for
coverings, and have them repaired or replaced.what to use. Inspect hoses. Clean radiator, condenser,
(The airbag system does not need regular maintenance.)pressure cap and filler neck. Pressure test the cooling
system and pressure cap.
6-9
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser