owners manual Jeep Compass

all ratings: 0 average rating: 5

50 THINGS TO KNOW BEFORE STARTINGYOUR VEHICLE 10. To disengage the mini-latch from the mini-buckle for3. Slide the latch plate upward over the folded webbing. storage, insert the regular latch plate into the blackThe folded webbing must enter the slot at the top of the button on the top of the mini-buckle. The belt willlatch plate. automatically retract to its stowed position. If necessary,4. Continue to slide the latch plate up until it clears the slide the latch plate down the webbing to allow the beltfolded webbing. to retract fully. Insert the mini-latch plate into the slot provided in the trim panel. Seat Belts In Passenger Seating Positions Lap/Shoulder Belt Untwisting ProcedureThe seat belts in the passenger seating positions are Use the following procedure to untwist a twisted lap/equipped with Automatic Locking Retractors (ALR) shoulder belt. which are used to secure a child restraint system. For additional information, refer to “Installing Child Re- 1. Position the latch plate as close as possible to thestraints Using The Vehicle Seat Belt” under the “Child anchor point. Restraints” section. The chart below defines the type of 2. At about 6 to 12 in (15 to 30 cm) above the latch plate,feature for each seating position. grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders