or
owners manual Alfa Romeo GT
owners manual Alfa Romeo GT - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Alfa Romeo GT owners manual EN
Document:
pdf (5.55 MB) 270 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Alfa Romeo GT, year of production 2004 - 2010:
–ONis the normal operating position ofTO MEMORISE TO RESET THE
the device. When the ring (A) is in thisTHE SPEED MEMORISED SPEED
position, the warning light Ü on the in-Move the ring (A) to ON and take the carIf the device has been disengaged for ex-
strument cluster turns on.to the required speed normally. Turn the ringample pressing the brake or clutch pedal,
Ring ( B) serves for memorising and main-(B) to (+) for at least three seconds, thenthe memorised speed can be reset as fol-
taining the car sped or for increasing or low-release it. The car speed is memorised andlows:
ering the speed memorised.it is therefore possible to release the accel-– accelerate gradually until reaching a
Turn the ring ( B) to (+) to memorise theerator pedal.speed approaching the one memorised;
speed reached or increase the speed mem-The car will continue to travel at the mem-– engage the gear selected at the time
orised. of speed memorising (4th, 5th or 6th
orised constant speed until one of the fol-
Turn the ring (B) to (
) to lower the speedlowing conditions takes place:speed);
memorised. – pressing the brake pedal;– press the RES button (C).
GETTING TO KNOW YOUR CAREach time the ring is actuated (B) the speed– pressing the clutch pedal;
increases or lowers by about 1.5 km/h. TO INCREASE THE
– if the ASR, MSR or ESP system cuts in;MEMORISED SPEED
Keeping the ring turned the speed changes– with Selespeed transmission if a gear isThe speed memorised can be increased
continuously. The new speed reached will in two ways:
be maintained automatically.changed;
The RES button ( C) resets the memorised– inadvertent movement of the Selespeed1) pressing the accelerator and then mem-
speed. gear control lever to position N.orising the new speed reached (turning the
IMPORTANT In the case of need (whenring to (B) for more than three seconds);
IMPORTANT Turning the ignition key toovertaking for instance) acceleration is pos-or
STOP or the ring (A) to OFF, the speedsible simply pressing the accelerator pedal;2) momentaneously turning the ring (B)
memorised is cleared and the system is respond to (+): each pulse of the ring will cor
switched off. later, releasing the accelerator pedal, the carto a slight increase in speed (about 1.5
will return to the speed memorised previ-
ously. km/h) while pressing continuously will cor-
respond to a continuous speed increase. Re-
leasing the ring (B) the new speed will be
memorised automatically.
50
Download PDF
Click here to download a pdf file with an instruction manual for Alfa Romeo GT
year of production from: 2004
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Alfa Romeo GT owners manual
pages 48 - 54
Alfa Romeo GT owners manual
page 51 / 270
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF