owners manual Subaru Outback

all ratings: 0 average rating: 5

Maintenance and service/Engine oil 11-13 CAUTION NOTE Refer to “Engine oil” F12-4. To prevent overfilling the engine oil, doNOTE . For 2.5 L models, be careful notnot add any additional oil above the full to touch the engine oil filter whenlevel when the engine is cold.Engine oil viscosity (thickness) affects removing the oil filler cap. Doing fuel economy. Oils of lower viscosity so may result in a burn, a & Changing the oil and oil filterprovide better fuel economy. However, pinched finger, or may causeChange the oil and oil filter according toin hot weather, oil of higher viscosity is some other injury. the maintenance schedule in the “War-required to properly lubricate the en- . Use only engine oil with theranty and Maintenance Booklet”.gine. recommended grade and vis- NOTE cosity. &Synthetic oil . Be careful not to spill engine oil. ChangingtheengineoilandoilfilterYou should use synthetic engine oil that when adding it. If oil touches theshould be performed by a well-trainedmeets the same requirements given for exhaust pipe, it may cause a badexpert. Contact your SUBARU dealerconventional engine oil. When using smell, smoke, and/or a fire. Iffor changingtheengineoilandoilfilter.synthetic oil, you must use oil of the same engine oil gets on the exhaustFully trained mechanics are on standbyclassification, viscosity and grade shown pipe, be sure to wipe it off.at a SUBARU dealer to utilize the in this Owner’s Manual. Refer to “Engine special tools, spare parts and recom-oil” F12-4. Also, you must follow the oil . If the level gauge cannot bemended oil for this work, and also, pulled out easily, twist the levelused oils are properly disposed of.and filter changing intervals shown in the gauge right and left, then gently. If performing oil replacement your-Warranty and Maintenance booklet. pull it out. Otherwise, you may beself, observe the local regulations andNOTE injured by accidentally strainingdispose of waste oil properly.Synthetic oil of the grade and viscosity yourself. noted in chapter 12 is the recom- To add engine oil, remove the engine oil&Recommendedgradeandmended engine oil for optimum engine fillercap and slowly pour engine oilviscosity performance. Conventional oil may be through the filler neck. After pouring oil used if synthetic oil is unavailable. into the engine, you must use the level CAUTION gauge to confirm that the oil level is correct. Use only engine oil with the recom- mended grade and viscosity.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders