owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN

Document: pdf (14.21 MB) 494 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Service products and filling capacities 487 Brake fluid Model Capacity WARNING G CL 550 4MATIC 9.0 US qt (8.5 l) Over a period of time, the brake fluid absorbs 24 CL 63 AMG 10.0 US qt (9.5 l) moisture from the air; this lowers its boiling point. CL 600 9.5 US qt (9.0 l) If the boiling point of the brake fluid is too low, CL 65 AMG vapor pockets may form in the brake system when the brakes are applied hard (e.g. when Additives driving downhill). This would impair braking ! efficiency. Do not use any additives in the engine oil. This could damage the engine. You should have the brake fluid renewed at regular intervals. The brake fluid change Engine oil viscosity intervals can be found in the Maintenance Booklet. Only use brake fluid approved by Mercedes- Benz. Information about approved brake fluid can be obtained at any qualified specialist workshop or on the Internet at http://bevo.mercedes-benz.com. Coolant Important safety notes Viscosity describes the flow characteristics WARNING G of a fluid. If an engine oil has a high viscosity, Antifreeze is highly flammable.F ire, open this means that it is thick; a low viscosity flames and smoking are prohibited when means that it is thin. handling antifreeze. Select an engine oil with an SAE classification If antifreeze comes into contact with hot (viscosity) suitable for the prevailing outside engine parts, it may ignite and you could burn data temperatures. The table shows you which ical Techn yourself .D o not spill any antifreeze on hot SAE classifications are to be used. The low- engine parts. temperature characteristics of engine oils can deteriorate significantly, e.g. as a result ! Only add coolant that has been premixed of aging, soot and fuel deposits. It is therefore with the desired antifreez ep rotection. You strongly recommended that you carry out could otherwise damage the engine. regular oil changes using an approved engine Further information on coolants can be oil with the appropriate SAE classification. found in the Mercedes-Benz Specifications for Service Products, MB Specifications for Service Products 310.1, e.g. on the Internet at http://bevo.mercedes-benz.com. Or contact a qualified specialist workshop. 24 Including external oil cooler. Z

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.